Filter
Top Products
Operation
RS-900 and RS1100 Series Installation/Operation Manual 61
PRE
L
IMINAR
Y
• Pincushion: “Pincushion” distortion can sometimes occur if the throw distance is very
short and/or the projector is equipped with an anamorphic lens (refer to
Installing and
Adjusting the CineWide Anamorphic Lens in Section 3). To correct it, select
Pincushion from the GeoCorrection menu and use the or button to make the
image rectangular. See Figure 4-7.
Figure 4-7. Pincushion Correction
Positive values
increase image height
at screen center.
Negative values
decrease image height
at screen center.
-+
Projector Projected Image