Filter
Top Products
Operation
RS-900 and RS1100 Series Installation/Operation Manual 59
PRE
L
IMINAR
Y
InstallationTo access the Installation adjustments, press MENU, then press the or button to
highlight Installation and press ENTER. The Installation sub-menu appears. Press EXIT to
return to the previous menu or press MENU to close all menus.
Language: Press the or button to select from the available languages: English,
French, Spanish, German and Italian.
Orientation: Press the or button to change the orientation of the projected image.
The RS-900/RS1100 can be installed on a ceiling or in a rear-screen configuration with
one or more mirrors. There are four settings: Floor Front, Ceiling Front, Floor Rear and
Ceiling Rear.
Virtual Cinema VCINE A 16:9 image is scaled
NON-linearly (more on the
sides than in the center) to
fit a 2.35:1 screen.
Virtual Cinema is available
only on RS-900/RS1100
projectors equipped with
the CineWide option.
Table 4-1. Aspect Ratio Settings (continued)
Aspect Ratio
Remote
Control
Key
Description
16:9 Image on
2.35:1 Screen
16:9 Image on
2.35:1 Screen with
Virtual Cinema
16:9 Image on
2.35:1 Screen
Installation
Language English
Orientation Floor Front
GeoCorrection >
Overscan 0
Blue Image Off
Sleep Timer Off
When you change a setting in the Installation menu, the change takes
effect immediately; you do not need to press ENTER afterwards.
(Press EXIT to return to the previous menu or MENU to exit.)
Note