Filter
Top Products
Operation
52 RS-900 and RS1100 Series Installation/Operation Manual
PRE
L
IMINAR
Y
Main Menu The Main Menu is the starting point for accessing all projector functions.
(You must enter a passcode to access the Setup and ISF menus.)
Source Select Choose Source Select from the Main Menu to switch video sources.
The active source is indicated by an arrow to its left; in this example, Video is the active
source. To select a different source, use the
or button to highlight it and press
ENTER.
Picture Adjust Use the controls in the Picture Adjust menu to calibrate your RS-900/RS1100 for
optimum picture quality. To access the Picture Adjust menu, press MENU, highlight
Picture Adjust and press ENTER.
To adjust a setting, use the or button to highlight it and press ENTER. Use the
or button to change the setting. When finished, press EXIT.
The RS-900/RS1100 has been designed to incorporate setup and calibration standards
established by the Imaging Science Foundation (ISF). The ISF has developed carefully
crafted, industry-recognized standards for optimal video performance and has
implemented a training program for technicians and installers to use these standards to
obtain optimal picture quality from Runco video display devices. Accordingly, Runco
recommends that setup and calibration be performed by an ISF certified installation
technician.
All signal types require separate processing. Therefore, you need to calibrate each input
separately.
Although it may be possible to obtain satisfactory picture quality using the naked eye and
regular program material, Runco recommends using the following calibration tools for best
results:
• External test pattern source – Ovation Multimedia, Digital Video Essentials or AVIA test
DVD or equivalent.
• A blue filter (provided with many test DVDs), for color level and tint adjustments.
Connect your test pattern source to the input that you are calibrating and proceed as
follows. Perform the adjustments in the order listed here.
➤
RS-900
Source Select
Picture Adjust
Aspect Ratio
Installation
Information
Setup
ISF
RS1100
Source Select
Picture Adjust
Aspect Ratio
Installation
Information
Setup
ISF
Source
➨
Video
S-Video
Component 1
Component 2
HDMI 1
HDMI 2
RGB HD
➤
Picture Adjust
Picture Memory Custom 1
Copy Settings >
Brightness 50
Contrast50
Color 50
Tint 0
Sharpness 5
Color Temperature 6500
Reset to Defaults
➤