Filter
Top Products
65
Network profi les
Each time that you connect your radio to a WiFi network, the radio will
store the details of that connection (SSID, security key, DHCP/IP address
settings) as a profi le. Up to four such profi les are stored in the radio so
that if the unit is used in multiple locations there is no need to enter the
network settings when returning to a location previously visited.
The radio stores the four most recent profi les in memory identifi ed by
their SSID. Normally the radio will attempt to connect to one of the stored
profi les and only if it is unable to do so will you need to use the Network
Wizard (see page 15).
In the event that you visit a location only once you may wish to delete the
profi le for the network in that location to avoid losing other profi les.
1. Access the menu for the current mode by pressing the Menu button.
Rotate the Tuning/Select control until 'System settings' is highlighted
on the display. Press the control to enter the settings menu.
2. Rotate the Tuning/Select control until 'Network' is highlighted on the
display. Press the control to enter the Network settings menu.
3. Rotate the Tuning/Select control until 'Network profi le' is highlighted
on the display. Press the control to see the stored profi les. The profi le
which is currently in use (if any) is marked with an asterisk.
4. To remove a profi le from memory, rotate the Tuning/Select control to
highlight the profi le to be deleted and then press the control.
5. The radio will offer a 'YES' or 'NO' selection. Rotate the Tuning/Select
control to select 'YES' and then press the control. The selected profi le
will be deleted.
Note that it is not possible to delete a profi le which is currently in use.
1
1-5