Introduction of XM operation
You can use this unit to control a XM satellite di-
gital tuner (GEX-P910XM), which is sold
separately.
For details concerning operation, refer to the
XM tuners operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuners operation manual.
1 XM channel number indicator
Shows to which XM channel number the
tuner is tuned.
XM operation
You can use the following function with this
unit.
! Selecting the XM channel directly (Refer to
this page.)
XM operation of the following functions with
this unit differs.
! Switching the XM display (Refer to this
page.)
! Swiching the XM channel select setting
(Refer to this page.)
Selecting the XM channel directly
When using the remote control, you can select
the XM channel directly by entering the de-
sired channel number.
1 Press DIRECT.
CH appears in the display.
2 Press NUMBER buttons to enter the de-
sired channel number.
# You can cancel the input number by pressing
CLEAR.
3 Press DIRECT.
The entered XM channel is selected.
# If you enter channel number 256 and over, the
number input mode is canceled.
Note
After entering the number input mode, if you do
not perform an operation within about four sec-
onds, the mode is automatically canceled.
Switching the XM display
% Press DISPLAY to switch the XM display.
Each press of DISPLAY changes the XM dis-
play in the following order:
Channel nameArtist name/featureSong/
program titleChannel category
Swiching the XM channel select
setting
You can switch if you select a channel with a
channel number or from a channel category
when you select a channel.
% Press CLOCK and hold to select the de-
sired channel select setting.
Press CLOCK and hold repeatedly to switch
between the following channel select settings:
chNumber (channel number select setting)
Category (channel category select setting)
Other Functions
En
51
English
Section
12