Filter
Top Products
Turning the unit on
% Press SOURCE on the head unit, or
press TUNER, CASSETTE or CD on the re-
mote, to turn the unit on.
When you select a source the unit is turned
on.
Selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in this unit (refer to page 19). To switch to the
cassette player, load a cassette tape in this
unit (refer to page 16).
% When using the head unit, press
SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
XM tunerTunerTelevisionBuilt-in
CD playerMulti-CD playerCassette
playerExternal unit 1External unit 2
AUX
% When using the remote control, press
TUNER, CASSETTE or CD to select a source.
Press each button repeatedly to switch be-
tween the following sources:
TUNER: XM tunerTunerTelevision
Sources off
CASSETTE: Cassette playerAUX
Sources off
CD: Built-in CD playerMulti-CD player
Sources off
Notes
! In the following cases, the sound source will
not change:
When there is no unit corresponding to the
selected source connected to this unit.
When there is no disc in the unit.
When there is no cassette in this unit.
When there is no magazine in the multi-
CD player.
When the AUX (auxiliary input) is set to off
(refer to page 46).
! External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
! When this units blue lead is connected to the
cars auto-antenna relay control terminal, the
cars antenna extends when this units se-
lected source is the tuner. To retract the anten-
na, switch to a source other than the tuner.
Turning the unit off
% Press SOURCE and hold until the unit
turns off.
When using the remote control, press TUNER,
CASSETTE or CD repeatedly.
Power ON/OFF
En
12
Section
03