Filter
Top Products
Playing a CD
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1 Track number indicator
Shows the track currently playing.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
# You can eject a CD by pressing CD EJECT.
2 After a CD has been inserted, press
SOURCE to select the built-in CD player.
3 Use Multi Control to adjust the sound
level.
Turn it to increase or decrease the volume.
4 To perform fast forward or reverse,
push and hold Multi Control left or right.
# If you select ROUGH, pushing and holding
Multi Control left or right enables you to search
every 10 tracks in the current disc. (Refer to Se-
lecting the search method on page 22.)
5 To skip back or forward to another
track, push Multi Control left or right.
Pushing Multi Control right skips to the start
of the next track. Pushing Multi Control left
once skips to the start of the current track.
Pushing again will skip to the previous track.
Notes
! The built-in CD player plays one, standard, 12-
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
! Do not insert anything other than a CD into
the CD loading slot.
! If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press CD EJECT to eject the disc, and check
the disc for damage before inserting it again.
! If the built-in CD player does not operate prop-
erly, an error message such as ERROR-11
may be displayed. Refer to Understanding
built-in CD player error messages on page 52.
! When a CD TEXT disc is inserted, the disc and
track titles automatically begin to scroll in the
display. When Ever Scroll is set to ON at the
initial setting, the disc and track titles scroll
continuously. About Ever Scroll, refer to
Switching the Ever Scroll on page 48.
Selecting a track directly
When using the remote control, you can select
a track directly by entering the desired track
number.
Built-in CD Player
En
19
English
Section
06