Filter
Top Products
3
Hooking Up the VCR
Back of TV
300/75 Ohm
Adapter
OR
From Antenna
or Cable
Cable/
Antenna
VHF
UHF
OR
RF Coaxial Cable
(supplied)
75 to 75/300 Ohm
Separator
OUT TO TV
IN FROM
ANT.
VHF/UHF
3 CH. 4
Back of VCR
IN
OUT
VIDEO1
AUDIO1
R
L
S-VIDEO
OUT
IN
Antenna or Cable System Without a Cable Box
A. Basic hookup.
Use this hookup for a basic connection
which requires fewer accessories.
1. Set the 3CH.4 switch on back of VCR to
either channel 3 or 4.
Tune the TV to this channel and use the
TV•VCR button to watch the VCR.
2. Connect as shown.
This connection may require additional
accessories not provided.
3. Plug in power cords of VCR and TV.
4.
B. Advanced hookup.
Use this hookup for slightly improved
picture quality, hi-fi stereo playback, and
more convenient operation Ñ use of the
TV•VCR button is not required.
1. Connect as shown.
This connection requires additional
accessories not provided. If your
TV/monitor has an S-VIDEO connector,
also connect the supplied S-VHS cable to
take advantage of S-VHS. If your TV is not
stereo, you may need a Y-adapter to hear
sound from both channels.
2. Plug in power cords of VCR and TV.
3.
Tune the TV to its video input to watch
the VCR. Set the AUTO TV/VCR feature to
OFF.
See the AUTO TV/VCR step in the
ÒStartupÓ section.
Go to ÒStartupÓ section.
Go to ÒStartupÓ section.
From Antenna
or Cable
OR
Back of TV
300/75 Ohm
Adapter
RF Coaxial Cable
(supplied)
AUDIO
CABLE /
ANTENNA
L /
MONO
RIGHT
VIDEO
INPUT
INOUT