Filter
Top Products
18
Controlling a VCR
The VCRÕs remote control is programmed for compatible RCA, ProScan, or GE VCRs with the VCR1
and VCR2•DVD buttons. Most compatible VCRs automatically respond to VCR1 without being
programmed. If you own two compatible VCRs, test them to see if VCR1 turns on both VCRs. If it
does, then you may want to program this VCR to respond to the VCR2•DVD button on the remote.
Program the VCR for Remote Control
Set the REMOTE CONTROL feature of the VCR to the VCR1 or
VCR2•DVD position. Then, the remote controls the VCR with either
the VCR1 or VCR2•DVD button Ñ the position you select in the
menu.
1. Press MENU to display the VCR MAIN MENU.
2. Press 5 to display the PREFERENCES menu.
3. Press 1 to activate the REMOTE CONTROL feature.
4. Press VCR1 or VCR2•DVD to change the setting and program
this VCR to respond to the VCR1 or VCR2•DVD button Ñ the
position you select.
The VCR2•DVD button on the VCRÕs remote is programmed to control most RCA and ProScan
laserdisc players or RCA, ProScan, and GE VCRs. It can also be programmed to control an RCA DVD
component using the code below. If the remote is changed for the DVD component, remember to
reprogram with the codes below to operate a VCR or laserdisc player.
Program the Remote Control
1. Turn on the component.
2. Point the VCR remote at the component.
3. Hold the VCR2•DVD button and press three number buttons to enter
the code for the component.
4. Release the buttons.
5. Press PWR or CHANNEL up or down. If the component turns off or
changes channels, setup is complete.
Operate the Component
After you set up your remote to control your component, test the remote
buttons to see which ones operate the component.
1. Point the VCR remote at the component and press VCR2•DVD.
2. If the component does not turn on in step 1, press VCR2•DVD and
then PWR.
Important Reminder: Remember you must press VCR1 or
VCR2•DVD on the remote Ñ the position you selected in the
menu Ñ before the remote will operate this VCR.
Using the Remote Control
VCR MAIN MENU
1 VCR PLUS+
2 TIMER RECORDINGS
3 TIME
4 CHANNELS
5 PREFERENCES
Controlling a Laserdisc Player or DVD Component
RCA, ProScan or GE Codes
VCR Laserdisc Player DVD
037 037 078
PREFERENCES
1 REMOTE CONTROL: VCR1
PREFERENCES
( PRESS VCR2 TO CHANGE )
2 AUTO PLAY: ON
3 AUTO TV/VCR: ON
4 FRONT PANEL: AUTO
5 CA MARKING: ON
6 CA PLAYBACK: AUTO
7 CA DISPLAY: BLUE
8 SET AUTO REPEAT
0 EXIT