Filter
Top Products
VCR MAIN MENU
1 VCR PLUS+
2 TIMER RECORDINGS
3 TIME
4 CHANNELS
5 PREFERENCES
6 AUDIO
27
Using the Playback Features
Blank Search
The VCR searches for blank portions of the tape that are more than six seconds long.
1. Insert the prerecorded tape and press STOP.
2. Press SEARCH three times to display the BLANK SEARCH
menu.
3. Press FF on the remote or use the SHUTTLE Dial on the VCR to
begin searching for six seconds of blank tape. A message
appears on the screen if a blank area is not found.
4. Press STOP to stop BLANK SEARCH.
TAPE PLAYBACK: HI-FI/MIX/LINEAR Feature
The VCR records the same audio on both the Hi-Fi and linear tracks on the tape. The Hi-Fi
sound is recorded on separate left and right stereo channels. Monaural sound is recorded on the
linear track.
To enjoy Hi-Fi sound, connect your VCR to a stereo television or amplifier/receiver using the
audio/video jacks. The TAPE PLAYBACK: HI-FI/MIX/LINEAR feature lets you select which
audio you play back.
To Select Playback Sound
1. Press MENU to display the VCR MAIN MENU.
2. Press 6 to display the AUDIO menu.
3. Press 2 to switch between HI-FI, MIX, or LINEAR sound.
¥ Select HI-FI to play back sound recorded on the Hi-Fi track
and for normal use.
The Hi-Fi indicator lights in the VCRÕs display panel.
¥ Select MIX to play back the sound recorded on both the linear
track and the Hi-Fi track, sound-on-sound.
The Hi-Fi indicator lights in the VCRÕs display panel.
¥ Select LINEAR to play back the sound recorded on the linear
monaural track, such as a second audio program (SAP).
The Hi-Fi indicator turns off in the VCRÕs display panel.
Playing a Tape
BLANK SEARCH
SEARCHING FOR BLANK AREA
PRESS FF TO BEGIN
PRESS SEARCH TO EXIT
AUDIO
1 RECEPTION: STEREO
2 TAPE PLAYBACK: HI-FI
0 EXIT