Filter
Top Products
37
Recording While You’re Away
Checking or Clearing VCR Plus+ or Timer Recordings
1. Press MENU on remote to display VCR MAIN MENU on TV
screen.
2. Press 2 to display the TIMER RECORDINGS menu.
3. Press 2 to display the REVIEW EXISTING PROGS.
4. Press MENU for the next program information or press
CLEAR to erase the program.
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the AUDIO1,
AUDIO2, S-VIDEO, VIDEO1 or VIDEO2 IN jacks of the VCR.
Recording from the line input is convenient if you have a satellite
receiver or similar component attached to these jacks. To timer
record from the component connected to the VCRÕs line input:
press INPUT to enter VIDEO 1 or VIDEO 2 instead of the channel
number on the TV screen during timer programming.
Using the Recording Features
Recording Pause
To prevent recording short passages of unwanted material, use PAUSE during recording to
stop and start recording. The VCR automatically switches from pause to stop after a few
minutes.
Pro-Tect Plus™ (Child Lock) Feature
This feature is useful to tamper proof your timer recordings from unwanted changes and/or
protect the VCR from misoperation by other users in the household
To Lock the VCR
Press and hold PWR (Power) on the remote for approximately six
seconds to turn on the Pro-Tect Plusª feature.
The word “SAFE” appears in the front display panel.
To Unlock the VCR
Press and hold PWR on the remote for approximately six seconds
to unlock the VCR.
Recording a Program
PROGRAM 1 (ONE TIME)
CHANNEL VIDEO 1
START TIME --:--
END TIME --:--
START DATE --/--/--
TAPE SPEED SLP
PRESS CLEAR TO CORRECT
PRESS MENU TO EXIT
VCR MAIN MENU
1 VCR PLUS+
2 TIMER RECORDINGS
TIMER RECORDINGS
1 CREATE A NEW PROGRAM
2 REVIEW EXISTING PROGS.
PROGRAM 1 (ONE TIME)
CHANNEL 08
START TIME 02:10 PM
END TIME 03:35 PM
START DATE 11/17/95 FRI
TAPE SPEED SLP
PRESS CLEAR TO ERASE
PRESS MENU FOR NEXT