Filter
Top Products
39
Recording a Program
Recording Audio Only
You can record audio only from another audio source connected to the AUDIO1 or AUDIO2 IN (L and R)
jacks on the back of the VCR. Any video on the tape will be erased when you record audio only.
To Record Audio Only
1. Press the INPUT button on remote until the line indicator ÒL1 (Rear
connection)Ó or ÒL2 (Front connection)Ó appears in the VCRÕs display
panel.
The VCR records audio from the audio equipment connected to the
AUDIO1 or AUDIO2 IN jacks.
2. Use SPEED on the remote to select the recording speed.
The tape speed indicator appears in the VCRÕs display panel and on the TV
screen.
3. Start playing the audio source. Then, press REC on remote or RECORD on
the VCR to begin recording.
The record indicator (
) and the playback indicator ( ) appear in the
VCRÕs display panel.
4. Press STOP•EJECT on the VCR or STOP on the remote when you are
finished.
To Play Back Audio Only
Connect the AUDIO OUT of the VCR to the appropriate input on your amplifier
or receiver. Do not use the phono input. Refer to your amplifier or receiver
userÕs guide for information.
S-VHS Recording ( )
The VCR is capable of recording in VHS or Super-VHS format. To record in S-VHS, use cassettes labeled
with the symbol. It is not possible to record in S-VHS using a standard VHS tape. tapes must
be played back in a VCR with S-VHS. S-VHS recordings cannot be played back in VCRs that do not have
the symbol. Refer to the chart below for the results.
¥ To record in S-VHS, push the S-VHS AUTO button. The S-VHS indicator
light turns on when no tape or an S-VHS tape is inserted. The indicator does
not turn on when a VHS tape is inserted.
¥ To turn off S-VHS and record in VHS, push S-VHS AUTO button. The S-VHS
AUTO indicator light turns off.