Filter
Top Products
22
Playing a Tape
Playback
To play a tape
1. Turn on the TV and tune it to channel 3, 4, or the TVÕs video input
to see the picture from the VCR.
2. Insert a tape in the VCR.
VCR automatically turns on. The cassette-in indicator ( ) lights,
and the VCR indicator lights if the AUTO TV/VCR feature is set to
ON. The tape automatically begins playback if the safety tab on the
cassette has been removed and the AUTO PLAY feature is
turned on.
3. Press PLAY•PAUSE on the VCR or PLAY on the remote or VCR,
if necessary.
4. Press TRACKING up or down on the remote or the VCR to remove
any streaks from the picture if necessary.
See ÒManual TrackingÓ
section.
5. Press STOP•EJECT on the VCR or STOP on the remote to stop the
tape.
6. Press REW on the VCR or the remote to rewind the tape.
End of Tape
The VCR automatically rewinds the tape if it reaches the end of the
tape during playback.
Power Off
If you press POWER while a tape is rewinding, the VCR turns off
automatically when it is completely rewound.
6. Press STOP•EJECT on the VCR to eject the tape once it is
completely rewound.
CHANNEL
REW
PLAY
FWD
POWER
TV•VCR
TRACKING
RECORD
STOP•EJECT
PAUSE
S•VHS AUTOS•VHS
MONO
VIDEO IN L•AUDIO IN•R
Safety Tab