Filter
Top Products
Controls and displays05
24
En
SB
– Depending on the source, this lights
when a signal with surround back channel
encoding is detected.
DIGITAL
– Lights when a digital audio
signal is detected.
2
DIGITAL
– Lights when a Dolby Digital
encoded signal is detected.
ANALOG
– Lights when an analog signal is
detected.
DTS
– Lights when a source with DTS
encoded audio signals is detected.
2
When the
STANDARD
mode is on, this lights
to indicate decoding of a DTS multichannel
signal.
3
2
DIGITAL
When the
STANDARD
mode is on, this lights
to indicate decoding of a Dolby Digital
multichannel signal.
4
2
PRO LOGIC II
x
When the (
STANDARD
) Pro Logic II mode is
on,
2
PRO LOGIC II
lights to indicate Pro
Logic II decoding.
2
PRO LOGIC II
x
lights to
indicate Pro Logic IIx decoding (see
Listening
in surround sound
on page 28).
5 VIR.SB
Lights during Virtual surround back
processing (page 31).
6
DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls for
the most accurate reproduction of a source.
7 AUTO SURR.
Lights when Auto Surround (see
Auto playback
on page 28) is on.
8
ATT
Lights when
ANALOG ATT
is used to
attenuate (reduce) the level of the analog input
signal.
9 SLEEP
Lights when the sleep mode is active (see
Remote control
below).
10
Tuner
indicators
–
Lights when the mono mode is set
using the
MPX
button.
–
Lights when a stereo FM broadcast is
being received in auto stereo mode.
–
Lights when a broadcast is being
received.
11 EON/RDS indicators
EON
– Lights when the EON mode is set,
and flashes during an EON broadcast. The
indicator lights when the current station
carries the EON service (page 48).
RDS
– Lights when an RDS broadcast is
received (page 47).
12 Speaker indicators
Lights to indicate the current speaker system,
A
and/or
B
(page 59).
13 Character display
14
Neo:6
When the (
STANDARD
) Neo:6 mode is on, this
lights to indicate Neo:6 processing.
15
ADV.SURR
. (Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
16 WMA9 Pro
Lights to indicate decoding of a WMA9 Pro
signal.
17
MIDNIGHT
Lights during Midnight listening (page 32).
18 D.E.
Lights when Dialog Enhancement (DIALOG E)
is switched on (page 32).
19
LOUDNESS
Lights during Loudness listening (page 32).
20 EX
Lights when a Dolby Digital Surround EX
encoded signal is detected.
VSX_916.book.fm 24 ページ ２００５年１２月２２日 木曜日 午後４時２１分