Filter
Top Products
Controls and displays
04
23
En
Display
1
SIGNAL
indicators
Light to indicate the currently selected input signal.
AUTO
lights when the receiver is set to select the input
signal automatically (page 29).
2 Program format indicators
These change according to which channels are active in
digital sources.
L
– Left front channel
C
– Center channel
R
– Right front channel
SL
– Left surround channel
S
– Surround channel (mono)
SR
– Right surround channel
SBL
– Left surround back channel
SB
– Surround back channel (mono)
SBR
– Right surround back channel
LFE
– Low frequency effects channel (the
((( )))
indicators light when
an LFE signal is being input)
3 Digital format indicators
Light when a signal encoded in the corresponding format
is detected (
DSD
PCM
lights during DSD (Direct
Stream Digital) to PCM conversion with SACDs).
4
OVER
/
ATT
OVER
lights to indicate that the level of an analog source
is too high.
ATT
lights when you use the attenuator
(
ANALOG ATT
) to reduce it.
5
VIDEO CONV.
Lights when digital video conversion is enabled
(page 57).
6 V.SB
Lights during Virtual surround back processing
(page 29)
.
7 Sound processing indicators
Light according to the active AV parameter(s) (page 57).
8
TUNER
indicators
TUNED
– Lights when a broadcast is being received.
STEREO
– Lights when a stereo FM broadcast is
being received in auto stereo mode.
MONO
– Lights when the mono mode is set using
the
MPX
button.
9 EON
/
RDS indicators
EON
– Lights when the EON mode is set (flashes
during EON reception). The indicator lights when
the current station carries the EON service (page 35).
RDS
– Lights when an RDS broadcast is received
(page 34).
10 Master volume level
11 HDMI connection indicators
Light to indicate the HDMI input currently selected.
12
STREAM DIRECT
Lights when Direct / Pure Direct is selected (page 28).
13 Speaker indicators
Indicate the current speaker system,
A
and/or
B
(page 52)
.
14 Listening mode indicators
THX
– Lights when a Home THX mode is selected.
ADV. SURROUND
– Lights when an Advanced
Surround mode has been selected.
STEREO
– Lights when stereo listening is switched
on (see
Listening in stereo
on page 28).
STANDARD
– Lights when a Standard Surround
mode is switched on (see
Listening in surround
sound
on page 26).
15
SLEEP
Lights when the receiver is in sleep mode (page 58).
16 Matrix decoding format indicators
2
PRO LOGIC IIx
–
This lights to indicate 2Pro
Logic II / 2Pro Logic IIx decoding (page 26).
Neo:6 – When one of the Neo:6 modes of the receiver
is on, this lights to indicate Neo:6 processing
(page 26).
17 Character display
Displays various system information.
18
SR+
Lights when the SR+ mode is switched on (page 54).
21 3 765 8 91011
171312 15 1816
4
14
SIGNAL
L C R
SL S SR
SBL SB
LFE
SBR
AUTO
ADV.SURROUND
STANDARD
SLEEP
THX
STEREO
SP
AB
HDMI
DIGITAL
STREAM
PRO LOGIC
DIGITAL
WMA9 Pro
HDMI
[
2
]
[
1
]
SR+
DSD PCM
96/24
DTS
VIDEO
OVER ATT
TONE
MONO
dB
Hi-bit/sampling
DIALOGUE LOUDNESS
STEREO
CONV. V.SB DNR
MIDNIGHT TUNED
EON
RDS
N
eo
: 6
2
2
DIRECT
ANALOG
VSX-2016_HY.book.fm 23 ページ ２００６年２月２４日 金曜日 午後１２時４０分