Pioneer HTZ-FS30DVD Home Theater System User Manual


 
Speaker Setup Guide 01
7
En
English
FrançaisDeutsch
Nederlands
Italiano Español
Do not stand on the speaker stand base of
the tall speaker to push or swing the
speaker. The speaker may fall and break, or
someone may be injured. Pay special
attention to children.
Securing your front and surround
speakers
Secure each of the front and surround
speakers using the plastic catch provided.
Screw two supporting hooks into the wall
behind the speaker. Pass a thick cord around
the hooks and through the plastic catch so that
the speaker is stabilized (make sure to test that
it supports the weight of the speaker). After
installing, make sure the speaker is securely
fixed.
CAUTION
The plastic catch is not a mounting fixture,
and the speaker should not be hung
directly from the wall using this catch.
Always use a cord when stabilizing the
speaker.
Pioneer disclaims all responsibility for any
losses or damage resulting from improper
assembly, installation, insufficient
strength of the installation materials,
misuse, or natural disasters.
When placing this unit, ensure that it is
firmly secured and avoid areas where it
may be likely to fall and cause injury in the
event of a natural disaster (such as an
earthquake).
Preparation only for the
HTZ-FS30DVD/HTZ-FS30DVD-AP
Assembling the speaker stands and
securing your front speakers
1 Install the pole with a circular nut
attached onto the speaker stand base, using
the hexagon nuts and washers provided.
Use the spanner provided for installation.
CAUTION
Be careful that the stand does not fall over
when installing the pole.
Plastic catch
Sufficiently thick
cord
HTZ585DVD_EN.book 7 ページ 2009年3月19日 木曜日 午後6時35分