Filter
Top Products
Other connections 12
43
En
English
FrançaisDeutsch
Nederlands
Italiano Español
Connecting using the
component video output
If your TV has component video inputs, you can
use these instead of the standard video outputs
for a better quality picture.
1
For the connection diagram, see 3 on page 42.
• Use a component video cable to connect
the
COMPONENT VIDEO OUT
to a set of
component inputs on your TV.
About progressive scan video
Compared to interlace video, progressive scan
video effectively doubles the scanning rate of
the picture, resulting in a very stable, flicker-
free image. Progressive scan video is available
only from the component video output.
Compatibility of this player with
progressive-scan and high-definition TVs.
• This player is compatible with progressive
video Macro Vision System Copy Guard.
2
Connecting for digital audio
This system has optical-type digital inputs. Use
these to connect external components, such
as your digital TV, MD or CD recorder.
For the connection diagram, see 1 on page 42.
• Connect the DIGITAL AUDIO IN (LINE1)
jack to the digital output of an external
playback component.
These include digital components such as a
digital TV, an MD player, digital satellite, or a
game system.
HTZ-FS30DVD/HTZ-FS30DVD-AP only:
This system has an optical-type digital output
for providing surround playback.
For the connection diagram, see 5 on page 42.
• Connect the DIGITAL AUDIO OUT jack
to the digital input on your multichannel
AV receiver.
Connecting an analog audio
component
You can use the ANALOG AUDIO IN (LINE 2)
jacks to connect an analog audio component,
such as a tape player.
For the connection diagram, see 2 on page 42.
• Connect the
ANALOG AUDIO IN (LINE 2)
jacks to the analog outputs of an external
playback component.
Connect using RCA pin-plug stereo cables.
Note
1 • The component video output is switchable between interlaced and progressive formats. See
Video Output settings
on page 38.
• While the player is connected using HDMI cable, the component video output cannot be switched between Interlace and
Progressive formats. When HDMI Resolution is set to 720x480i (NTSC)/720x576i (PAL), Interlace format is automatically
selected, and Progressive format is automatically selected in other settings.
2 Consumers should note that not all high-definition television sets are fully compatible with this product and may cause
artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch
the connection to the ‘standard definition’ output (Interlace). If there are questions regarding our TV set compatibility with this
model, please contact our customer service center.
HTZ585DVD_EN.book 43 ページ ２００９年３月１９日 木曜日 午後６時３５分