Filter
Top Products
Initial Settings menu11
38
En
Chapter 11
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1 Press
DVD/CD
.
2 With playback stopped, press
HOME
MENU
and select ‘Initial Settings’.
3Use
///
and
ENTER
to select the
setting and option you want to set.
All the settings and options are explained on
the following pages.
1
Digital Audio Out settings
HTZ-FS30DVD/HTZ-FS30DVD-AP only
Video Output settings
Note
1 • In the table, the default setting is shown in bold: other settings are shown in italics.
• Some settings, such as TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often
these settings can also be made from the DVD disc menu.
• The HDMI Resolution and HDMI Color settings only need to be set if you connected this player to an HDMI-compatible
component using the HDMI connector.
2 This setting can only be used when you are connected via HDMI and have the HDMI resolution set to 1920x1080p, 1920x1080i
or 1280x720p. When using this setting, only the HDMI connection is available.
Initial Settings
Setting Option What it means
Dolby Digital Out Dolby Digital Dolby Digital encoded digital audio is output when playing a
Dolby Digital DVD disc.
Dolby Digital > PCM Dolby Digital audio is converted to PCM audio before being
output.
DTS Out DTS DTS encoded digital audio is output when playing a DTS disc.
(Noise will be output if your amplifier/receiver is not
compatible with DTS audio.)
DTS > PCM No digital audio is output when playing a DTS disc.DTS audio
is converted to PCM audio before being output.
Setting Option What it means
TV Screen
(See also Screen sizes
and disc formats on
page 55.)
4:3 (Letter Box) Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
4:3 (Pan & Scan) Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
16:9 (Wide) Set if you have a widescreen TV.
16:9 (Compressed) Set if you have a widescreen TV. 4:3 material is shown with
black bars on either side of the screen.
2
HTZ585DVD_EN.book 38 ページ ２００９年３月１９日 木曜日 午後６時３５分