Filter
Top Products
Surround sound settings09
36
En
• OFF (default) – No dynamic range
adjustment (use when listening at higher
volumes)
• MID – Mid setting
• HIGH – Dynamic range is reduced (loud
sounds are reduced in volume while
quieter sounds are increased)
DTS CD setting (
CD TYPE
)
If you play a DTS-encoded CD, you will need to
change this setting to hear the decoded signal.
• NORMAL – Regular CD playback; some
DTS-encoded CDs output a noisy signal.
• DTS-CD – Proper decoding of DTS-
encoded CDs; the beginning of regular CD
tracks may be skipped.
Dual mono setting (
DUALMONO
)
Specifies how dual mono encoded Dolby
Digital soundtracks should be played. This
setting can also be used to change the audio
channels for DVD-RW discs recorded in
bilingual audio, and external inputs with
bilingual audio.
1Press
SHIFT+AUDIO
repeatedly to select a
setting.
Select one of the following while a disc is
playing dual mono audio.
1
• CH1 MONO – Only channel 1 is played
• CH2 MONO – Only channel 2 is played
• CH1/CH2 – Both channels are played
through the front speakers
Effective Sound for optimum sound
(
S.FIELD
)
With the uniquely shaped high-quality
speakers supplied with this unit, the Effective
Sound mode enables the following Pioneer
exclusive audio technologies designed to
maximize the real experience of sound
originally inherent in movies and music.
Turn on the Effective Sound mode under
normal circumstances to maximize the
capabilities of this unit.
2
•
Dynamic Range Compression
Resuscitates detailed sound susceptible to
ambient noise to create an acoustic
environment where you feel as if you are right
in the action.
•
Frequency Characteristic Correction
Realizes the playback characteristic optimized
for long hours of listening in addition to the
added features of the supplied speaker units.
• EFFECT (Effective Sound) – Plays the sound
with the characteristics optimized for the
included speakers.
• DIRECT (Direct Sound) – Turns off the
Effective Sound mode.
Note
1 When DVD function is selected, the displayed setting items are L, R and L+R (displayed on OSD).
2 The Sound Field will not affect the headphone outputs.
HTZ585DVD_EN.book 36 ページ ２００９年３月１９日 木曜日 午後６時３５分