Filter
Top Products
Specifications
General
Ratedpowersource ...............14.4 V DC
(allowable voltage range:
12.0 14.4 VDC)
Grounding system...................Negativetype
Max. currentconsumption
.....................................................10.0 A
Dimensions (W× H× D):
Chassis ...............................178 × 100 × 160 mm
Nose.....................................169 × 94 × 15 mm
Weight ..........................................2.5 kg
Audio/DSP
Continuous poweroutput is22 Wper channelminimum
into 4ohms, bothchannels driven50 to15,000 Hzwith
no morethan 5%THD.
Maximum poweroutput.......50 W × 4
Load impedance ......................4 W (4 8Wallowable)
Preoutmax outputlevel/output impedance
.....................................................1.8 V/1 kW
Loudness contour ...................+10 dB (100 Hz), +7 dB (10
kHz) (volume: 30dB)
Equalizer (9-BandGraphic Equalizer):
Frequency ..........................50/100/200/400/800 Hz
1.6/3.15/6.3/12.5 kHz
Equalization range........±12 dB
Network:
HPF (Front/rear):
Frequency ................50/63/80/100/125 Hz
Slope ..........................6 dB/oct,12 dB/oct
Subwoofer:
Frequency ................50/63/80/100/125 Hz
Slope ..........................12 dB/oct,18 dB/oct
Gain ............................+6 24dB
Phase ........................Normal/Reverse
CD player
System ..........................................Compact disc audiosystem
Usable discs ..............................Compactdisc
Signal format:
Sampling frequency.....44.1 kHz
Number ofquantization bits
...........................................16; linear
Frequency characteristics ...5 20,000 Hz(±1 dB)
Signal-to-noise ratio ...............94 dB (1 kHz) (IEC-Anet-
work)
Dynamic range .........................92 dB (1 kHz)
Number ofchannels ..............2 (stereo)
Cassette player
Tape ................................................Compactcassette tape(C-
30 C-90)
Tapespeed ..................................4.8 cm/sec
Fast forward/rewinding time
.....................................................Approx. 100sec (C-60)
Wow & flutter .............................0.09 % (WRMS)
Frequency response:
Metal ...................................30 19,000Hz (±3dB)
Stereo separation ....................45 dB
Signal-to-noise ratio:
Metal:
Dolby B NR IN .......67 dB (IEC-A network)
Dolby NR OUT .......61 dB (IEC-A network)
FM tuner
Frequency range ......................87.5 108.0MHz
Usable sensitivity.....................8 dBf (0.7 µV/75 W, mono,
S/N: 30dB)
50 dBquieting sensitivity.....10 dBf (0.9 µV/75 W,mono)
Signal-to-noise ratio ...............75 dB (IEC-A network)
Distortion .....................................0.3 % (at 65 dBf, 1 kHz,
stereo)
0.1 %(at 65dBf, 1kHz,
mono)
Frequency response ...............30 15,000Hz (±3dB)
Stereo separation ....................45 dB (at 65 dBf, 1 kHz)
AM tuner
Frequency range ......................531 1,602kHz (9kHz)
530 1,640 kHz(10kHz)
Usable sensitivity.....................18 µV (S/N: 20 dB)
Signal-to-noise ratio ...............65 dB (IEC-A network)
Infrared remote control
Wavelength.................................940 nm ±50 nm
Output ...........................................typ; 12 mw/sr per Infrared
LED
Note
Specifications and thedesign are subject to pos-
sible modifications withoutnotice due to im-
provements.
Additional Information
En
43
English
Appendix