Filter
Top Products
Playing a tape
1
3
2
These are the basic steps necessary to play a
tape with your cassette player. More advanced
cassette player operation is explained starting
on the next page.
WARNING
Do not use withthe front panel left open, after
ejecting a cassettetape. If you do leave it open, it
may result in injury in the event of an accident.
1 Tape direction indicator
Shows the direction of the tape transport.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent side of the tape.
3 METAL indicator
Shows when a metal or chrome tape is in-
serted.
1 Press TAPE EJECT.
Cassette loading slot appears.
# After a cassette tapehas been inserted, press
SOURCE upward ordownward to select the cas-
sette player.
2 Insert a cassette tape into the cassette
loading slot.
Front panel is closed automatically, and play-
back will start.
Cassette loadingslot
# You can ejecta cassette tape by pressing
TAPE EJECT.
3 Use VOLUME to adjust the sound level.
Press VOLUME on the head unit upward to in-
crease the volume, and press downward to
lower the volume.
4 To perform fast forward or rewind,
press c or d.
FF or REW appears in the display.
# Tocancel fast forward or rewind and returnto
playback, press BAND.
# You can cancelfast forward or rewindby
pressing c or din the same direction twice.
5 To perform forward or rewind music
search, press c or d twice.
F-MS (forward music search) or R-MS (rewind
music search) appears in the display. The cas-
sette player will fast forward or rewind to the
next or previous blank spot on the tape and
begin to play.
# Tocancel music search and returnto play-
back, press BAND.
# You can cancelmusic search by pressing cor
d in the samedirection again.
6 To change the direction of the tape
transport, press BAND.
Cassette Player
En
13
English
Section
05