Filter
Top Products
Playing a CD
2
1
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
WARNING
Do not use withthe front panel left open, after
ejecting a CD.If you do leave it open, it may result
in injury in the event ofan accident.
1 Track number indicator
Shows the track currently playing.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press CD EJECT.
CD loading slot appears.
# After a CD has beeninserted, press SOURCE
upward or downward to select the built-inCD
player.
2 Insert a CD into the CD loading slot.
Front panel is closed automatically, and play-
back will start.
CD loadingslot
# You can ejecta CD by pressing CD EJECT.
3 Use VOLUME to adjust the sound level.
Press VOLUME on the head unit upward to in-
crease the volume, and press downward to
lower the volume.
4 To perform fast forward or reverse,
press and hold c or d.
5 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
! The built-in CDplayer plays one, standard, 12-
cm or 8-cm (single)CD at a time. Donot use
an adapter when playing 8-cmCDs.
! Do not insert anythingother than a CD into
the CD loading slot.
! A CD left partiallyinserted after ejection may
incur damage or fall out.
! If you cannot insert adisc completely or if
after youinsert a disc the discdoes not play,
check that the label side of the disc is up.
Press CD EJECT to ejectthe disc, and check
the disc for damagebefore inserting the disc
again.
! If the built-in CD playerdoes not operate prop-
erly, an error message suchas CD ERR-11
Built-in CD Player
En
16
Section
06