Filter
Top Products
Recalling sound field programs
Here is a list of the sound field programs:
Button Display Effect
1 STUDIO Studio
2 JAZZ CLUB Jazz club
3 CLUB Club
4 BBE BBE
1 Press DSP to select the sound field con-
trol.
Press DSP until SFC appears in the display.
# If the sound field controlhas been previously
set to a soundfield program then the titleof that
previously selected soundfield program will be
displayed instead ofSFC.
2 Select a sound field program by press-
ing 14.
Select the desired sound field program by
pressing one of the numbered buttons, from
14, which correspond to the different sound
field programs as listed above.
# You can alsosequentially select a sound field
program by pressingc or d.
Adjusting BBE sound level
With BBE sound processing technology, you
can adjust the level of BBE.
1 Recall BBE.
See Recalling sound field programs on this
page.
2 Press a or b to adjust the level of BBE.
Each press of a or b increases or decreases
the level of BBE.
+4 4 is displayed as the level is increased
or decreased.
Using the graphic equalizer
The graphic equalizer lets you adjust the
equalization to match car interior acoustic
characteristics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display Equalizer curve
S-BASS Super bass
POWER Powerful
NATURAL Natural
VOCAL Vocal
FLAT Flat
CUSTOM1 Custom 1
CUSTOM2 Custom 2
! CUSTOM1 and CUSTOM2 are adjusted
equalizer curves that you create. Adjust-
ments can be made with a 9-band graphic
equalizer.
! When FLAT is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
1 Press DSP to select the graphic equali-
zer.
Press DSP until POWER appears in the dis-
play.
# If the graphic equalizerhas been previously
set to an equalizercurve other than POWERthen
the title of that previously selected equalizer
curve will be displayed insteadof POWER.
Digital Signal Processor
En
33
English
Section
09