Filter
Top Products
5 minute guide
02
7
En
English
Français
Deutsch
Nederlands
Italiano
Español
Using the Quick Setup
You can use the Quick Setup to get your system
up and running with just a few button presses.
The receiver automatically makes the
necessary settings after you have selected your
speaker setup, room size and listening position.
•
VSX-516 model only –
For a more complete
surround setup, see
Automatically setting
up for surround sound (MCACC)
on page 8.
If you want to make more specific settings,
refer to
The System Setup menu
on page 31.
Use the front panel controls for the steps below.
Illustration shows the VSX-516 model
1 If the receiver is off, press
STANDBY/ON
to turn the power on.
2 Press
QUICK SETUP
.
3 Confirm your subwoofer setting.
•
VSX-416 model –
Use the
MULTI JOG
dial to
select
YES
or
NO
, depending on whether
you’ve connected a subwoofer, then press
ENTER
.
•
VSX-516 model –
SW DET
flashes in the
display while the receiver checks your setup
for a subwoofer.
SW YES
or
SW NO
confirms
the subwoofer check, then the display
prompts you to select your speaker setup.
4 Use the
MULTI JOG
dial to choose your
speaker setup.
If you selected
YES
(
VSX-416 model
) or
subwoofer was detected
(
VSX-516 model
) for
the subwoofer setting in step 3, the following
choices are available:
2.1ch – 3.1ch – 4.1ch – 5.1ch – 6.1ch*
If you selected
NO
(
VSX-416 model
) or
subwoofer wasn’t detected
(
VSX-516 model
) for
the subwoofer setting in step 3, the following
choices are available:
2.0ch – 3.0ch – 4.0ch – 5.0ch – 6.0ch*
• Check the table below to find the speaker
setup that corresponds with your system.
* VSX-516 model only
5 Press
ENTER
.
6 Use the
MULTI JOG
dial to choose your
room size.
Depending on the distance of your speakers
from the listening position, choose between
small, medium, or large (
S
,
M
or
L
),
M
being an
average-sized room.
7 Press ENTER.
8 Use the
MULTI JOG
dial to choose your
listening position.
You can cycle between the following choices:
•
FWD
– If you are nearer to the front
speakers than the surround speakers
•
MID
– If you are equal distance from the
front and surround speakers
•
BACK
– If you are nearer to the surround
speakers than the front speakers
9 Press
ENTER
to confirm your setup.
The display shows the speaker setup, room size
and listening position that you have selected.
STANDBY
/
ON
PHONES
DVD/ LD
DVD 5.1
TV/SAT
DVR/ VCR
STANDARD
MIDNIGHT/
LOUDNESS
ADVANCED
SURR
ST/DIRECT/
AUTO SURR
LISTENING
MODE
QUICK
SETUP
SETUP
RETURN
MUTE
TONE
PTY
SEARCH
SPEAKER
IMPEDANCE
TUNER
EDIT
EON
MODE
MULTI JOG
UPDOWN
MULTI JOG
MASTER
VOLUME
ENTER
AUDIO / VI DEO MULTI-CHANNEL
RECEIVER
VSX
-
516
AM
USB
MCACC
SETUP MIC
TUNING/STATION
SIGNAL
SELECT
SB
ch
PROCESSING
ACOUSTIC
EQ
VSX_516.fm 7ページ ２００５年１２月２２日 木曜日 午後３時５０分