Filter
Top Products
Controls and displays
05
21
En
English
Français
Deutsch
Nederlands
Italiano
Español
Display
Illustration shows the VSX-516 model
1
SIGNAL SELECT
indicators
Lights to indicate the type of input signal
assigned for the current component:
AUTO
Lights when
AUTO
signal select is on.
SB
(VSX-516 model only)
Depending on the source, this lights when
a signal with surround back channel
encoding is detected.
DIGITAL
Lights when a digital audio signal is
detected.
DTS
Lights when a source with DTS encoded
audio signals is detected.
2
DIGITAL
Lights when a Dolby Digital encoded
signal is detected.
ANALOG
Lights when an analog signal is detected.
2
When the
STANDARD
mode of the receiver is
on, this lights to indicate decoding of a DTS
multichannel signal.
3
2
DIGITAL
When the
STANDARD
mode of the receiver is
on, this lights to indicate decoding of a Dolby
Digital multichannel signal.
4
2
PRO LOGIC II
x
(VSX-516 model) /
2
PRO LOGIC II
(VSX-416 model)
When the (
STANDARD
) Pro Logic II mode
of the receiver is on,
2
PRO LOGIC II
lights to indicate Pro Logic II decoding.
2
PRO LOGIC II
x
lights to indicate Pro Logic
IIx decoding (see
Listening in surround
sound
on page 25 for more on this).
5 VIR.SB
Lights during Virtual surround back
processing (page 28).
6
DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls for
the most accurate reproduction of a source.
7 AUTO SURR.
Lights when the Auto Surround feature is
switched on (see
Auto playback
on page 25).
8
ATT
Lights when
ANALOG ATT
is used to attenuate
(reduce) the level of the analog input signal.
9 SLEEP
Lights when the receiver is in sleep mode.
6
6
0
L
C
R
Ls
Rs
[]
[]
[]
[]
[]
SB
SB
[]
R
40
125
2504K
13K
L
[ ]
SP
A
12345678910
14
1817 19 2015 16 21 22 23
13
EON
RDS
11 12
VSX_516.fm 21 ページ ２００５年１２月２２日 木曜日 午後３時５０分