Filter
Top Products
Connecting up04
14
En
Microsoft, Windows Media
®
, and the Windows logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Connecting other video
components
This receiver has audio/video inputs and
outputs suitable for connecting analog or
digital video recorders, including VCRs, DVD-
recorders and HDD recorders.
1 Connect a set of audio/video outputs on
the recorder to the DVR/VCR AUDIO and
VIDEO inputs on this receiver.
Use a stereo RCA phono cable for the audio
connection and a standard RCA video cable for
the video connection.
2 Connect a set of audio/video inputs on
the recorder to the DVR/VCR AUDIO and
VIDEO outputs on this receiver.
Use a stereo RCA phono cable for the audio
connection and a standard RCA video cable for
the video connection.
3 If your video component has a digital
audio output, connect it to a digital input on
this receiver.
The example shows a recorder connected to
the
DIGITAL COAX 2 (DVR/VCR)
input.
1
Note
1 If your video component doesn’t have a digital audio output, omit this step. If it only has an optical digital output, you can con-
nect it to the optical input on this receiver using an optical cable. When you set up the receiver you'll need to tell the receiver
which input you connected the component to (see
The Input Assign menu
on page 36).
COAX
OPT
(
CD
)
ASSIGNABLE
DIGITAL IN
1
(
DVR/VCR
)
COAX
(
DVD/LD
)
1
2
ASSIGNABLE
DIGITAL IN
AM
LOOP
FM UNBAL
75
Ω
IN
IN
IN
MONITOR
OUT
OUT
VIDEO
SUB
WOOFER
IN
IN
IN
IN
OUT
OUT
IN
CD
DVR /
VCR
TV /
SAT
DVD
/LD
PLAY
CD-R
/TAPE
/MD
FRONT
PREOUT
REC
ANTENNA
D V D
5.1CH
INPUT
AUDIO
R
L
DVR, VCR, LD player, etc.
DIGITAL OUT
OPTICAL COAXIAL
R L
VIDEO IN
R L
AUDIO IN
IN
REC
AUDIO OUT
PLAY
OUT
VIDEO OUT
3
2 1
This receiver
VSX_516.fm 14 ページ ２００５年１２月２２日 木曜日 午後３時５０分