Filter
Top Products
Making recordings
09
41
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 9:
Making recordings
Making an audio or a video
recording
You can make an audio or a video recording
from the built-in tuner, or from an audio or
video source connected to the receiver (such
as a CD player or TV).
Keep in mind you can’t make a digital
recording from an analog source or vice-versa,
so make sure the components you are
recording to/from are hooked up in the same
way (see
Connecting up
on page 10 for more on
connections).
Illustration shows the VSX-516 model
1 Select the source you want to record.
Use the input select buttons (
INPUT
SELECTOR
).
2 Select the input signal (if necessary).
Press
SIGNAL SELECT
(front panel) to select
the input signal corresponding to the source
component (see page 27 for more on this).
3 Prepare the source you want to record.
Tune to the radio station, load the CD, video,
DVD etc.
4 Prepare the recorder.
Insert a blank tape, MD, video etc. into the
recording device and set the recording levels.
1
Refer to the instructions that came with the
recorder if you are unsure how to do this. Most
video recorders set the audio recording level
automatically—check the component’s
instruction manual if you’re unsure.
5 Start recording, then start playback of the
source component.
Note
1 The receiver's volume, balance, tone (bass, treble, loudness), and surround effects have no effect on the recorded signal.
INPUT SELECTOR
RECEIVER
STANDARD
ADV.SURR
STEREO
MIDNIGHT/
LOUDNESS
SLEEP
DVD 5.1
DVRDVD
CD-R
AMFMCD
RECEIVER
TV
DIMMER
ANALOG ATT
USB
VSX_516.fm 41 ページ ２００５年１２月２２日 木曜日 午後３時５０分