Filter
Top Products
Listening to your system
06
27
En
English
Français
Deutsch
Nederlands
Italiano
Español
3
Press EFFECT/CH SEL again to adjust
other settings
.
Listening in stereo
When you select STEREO or DIRECT, you will
hear the source through just the front left and
right speakers (and possibly your subwoofer
depending on your speaker settings).
Dolby Digital, DTS and WMA9 Pro multi-
channel sources are downmixed to stereo.
• While listening to a source, press
STEREO
for stereo playback.
Press repeatedly to switch between:
• STEREO – The audio is heard with your
surround settings and you can still use the
Midnight, Loudness, and Tone functions.
• DIRECT – Bypass all effects and surround
settings so that the audio remains as close
to the source audio signal as possible.
1
• AUTO SURR. – See Auto playback on
page 25 for more on this.
Listening with Acoustic
Calibration EQ
VSX-516 model only
• Default setting: OFF / ALL CH (after the
Auto MCACC Setup or EQ Auto Setting)
You can listen to sources using the Acoustic
Calibration Equalization set in Automatically
setting up for surround sound (MCACC) on
page 8 or Acoustic Calibration EQ on page 33.
Refer to these pages for more on Acoustic
Calibration Equalization.
• While listening to a source, press (SHIFT +)
ACOUSTIC EQ.
Press repeatedly to select between:
• ALL CH – No special weighting is given to
any one channel.
Setting What it does
Options
Center
Width
a
(Applicable
only when
using a cen-
ter speaker)
a Only available with 2ch sources in Dolby Pro Logic IIx Mu-
sic mode.
Spreads the center channel
between the front right and left
speakers, making it sound
wider (higher settings) or
narrower (lower settings).
0 to 7
Default: 3
Dimension
a
Adjusts the surround sound
balance from front to back,
making the sound more distant
(minus settings), or more
forward (positive settings).
–3 to +3
Default: 0
Panorama
a
Extends the front stereo image
to include surround speakers
for a ‘wraparound’ effect.
OFF
ON
Center
Image
b
(Applicable
only when
using a cen-
ter speaker)
b Only available with 2ch sources in Neo:6 Music mode.
Adjusts the center image to
create a wider stereo effect with
vocals. Adjust the effect from 0
(all center channel sent to front
right and left speakers) to 10
(center channel sent to the
center speaker only).
0 to 10
Default: 3
Effect Sets the effect level for the
currently selected Advanced
Surround mode (each mode
can be set separately).
10 to 90
Note
1 If you switch on Midnight listening, Loudness, Dialog Enhancement, the Sound Retriever or the Tone controls when DIRECT
is selected, the receiver automatically switches to STEREO.
STANDARD
ADV.SURR
STEREO
MIDNIGHT/
LOUDNESS
TOP MENU
CD-R
AMFMCD
MENU
RETURN
S.RETRIEVER
HDD
DVD
DVD/DVR
SUBTITLE
MUTE
EFFECT/CH SEL ACOUSTIC EQ
LEVEL
VOLUME
CH CH
06_playing_sources.fm 27ページ ２００５年１２月２６日 月曜日 午前１１時２分