Filter
Top Products
Connecting your equipment 03
21
En
English
Français
Deutsch
Nederlands
Italiano
Español
Selecting the Speaker system
The front height terminals can be used for front
wide and Speaker B connections, in addition to
for the front height speakers. Also, the
surround back terminals can be used for bi-
amping and ZONE 2 connections, in addition
to for the surround back speakers. Make this
setting according to the application.
Front height setup
*Default setting
1 Connect a pair of speakers to the front
height speaker terminals.
See Connecting the speakers on page 18.
2 If necessary, select ‘
Normal(SB/FH)
’ from
the
Speaker System
menu.
See Speaker system setting on page 100 to do
this.
Front wide setup
1 Connect a pair of speakers to the front
height speaker terminals.
See Connecting the speakers on page 18.
2 Select ‘
Normal(SB/FW)
’ from the
Speaker System
menu.
See Speaker system setting on page 100 to do
this.
Speaker B setup
You can listen to stereo playback in another
room.
1 Connect a pair of speakers to the front
height speaker terminals.
See Connecting the speakers on page 18.
2 Select ‘
Speaker B
’ from the
Speaker
System
menu.
See Speaker system setting on page 100 to do
this.
Bi-Amping setup
Bi-amping connection of the front speakers for
high sound quality with 5.1-channel surround
sound.
1 Connect a Bi-amp compatible speakers to
the front and surround back speaker
terminals.
See Bi-amping your speakers on page 20.
2 Select ‘
Front Bi-Amp
’ from the
Speaker
System
menu.
See Speaker system setting on page 100 to do
this.
ZONE 2 setup
With these connections you can
simultaneously enjoy 5.1-channel surround
sound in the main zone with stereo playback
on another component in ZONE 2.
1 Connect a pair of speakers to the
surround back speaker terminals.
See Connecting the speakers on page 18.
2 Select ‘
ZONE 2
’ from the
Speaker System
menu.
See Speaker system setting on page 100 to do
this.
VSX-1020_UC.book 21 ページ ２０１０年１月７日 木曜日 午後６時０分