Filter
Top Products
19
English
3 Press DISPLAY once, twice or three times to see:
‹ Remaining track time, total remaining time, or total
track time with level indicator off.
4 To temporarily interrupt play, press PAUSE.
‹ PAUSE will light up on the display.
5 To continue play, press PAUSE again or press PLAY.
6 To stop play, press STOP.
‹ The number of tracks and the total playing time on
the CD will appear on the display.
Selecting a track during play
1 Briefly press ∞ or § one or more times.
‹ The player will skip to the beginning of the current,
previous or next tracks, including tracks on the other
disc when both decks are in use as a 2-disc changer.
or
• Select CD-R or CD on the remote control, then press the
desired track number using the numeric key pad on the
remote control. For two-digit track numbers, press the
numeric keys in rapid succession. For tracks on the other
disc, select the desired deck first by pressing CD or CD-R.
‹ Play will skip to the beginning of the selected track.
Selecting a track when CD is not playing
1 Briefly press ∞ or § one or more times.
or
Select CD-R or CD on the remote control, then press the
desired track number using the numeric key pad on the
remote control. For two-digit track numbers, press the
numeric keys in rapid succession.
2 Press PLAY.
‹ Play will start with the track selected.
Searching during CD play
1 Hold down ∞ or § on the front of the deck or 5 or 6 on
the remote control.
‹ The player will search either forward or backward at ten
times the normal speed with the sound on low level,
and will then search at fifty times the normal speed
with the sound muted. The search will extend over both
discs if the changer mode (DUAL off) is activated.
2 Release the button when the desired passage has been
found.
‹ Play will start with the desired passage.
Note: During Shuffle, Repeat or Programmed play, search is
restricted to within the track being played at the time.
1 Press DUAL to switch off the
DDUUAALL
mode and to switch on
the two-disc changer mode.
‹
DDUUAALL
should not be lighted on the display.
2 Press SHUFFLE on the remote control before starting or
during play to activate shuffle play.
‹ The tracks on the CD (or in program if programmed) will
play in random order. SHUFFLE will appear on the
display between tracks.
3 Press SHUFFLE again to return to normal CD play.
Note: Shuffle is also cleared when you open the disc tray.
1 Press REPEAT on the remote control one or more times
during CD play.
‹ When REPEAT 1 appears on the display, the current track
plays repeatedly. When REPEAT appears on the display,
the discs or programmes play repeatedly.
2 To return to normal play, press REPEAT one or more times
until:
‹ The
RREEPPEEAATT
message disappears from the display.
Note:
- You can use shuffle in combination with repeat CD or
programmed play using the two-disc changer.
- Repeat will also be cleared if you open the disc tray.
Repeat CD, track or program
P
R
E
V
.
S
H
U
F
F
L
E
REPEAT
O
P
E
N
/C
L
O
S
E
D
IS
P
L
A
Y
PROGRAM
C
D
R
C
D
1
2
3
4
5
7
8
0
6
9
y
P
L
A
Y
5
Shuffle (random order) play
P
RECORD
P
LA
Y
P
A
U
S
E
S
T
O
P
FINALIZE
ERASE
Recordable
CD-RECORDABLE/REWRITABLE
Selecting a track or searching
PLAYING