Filter
Top Products
14
2 To start dubbing, press PLAY on the CD Player deck.
‹ High-speed dubbing will start.
DDUUBBBB
will stop flashing
and remain lighted. The track number and the recording
time will be displayed.
• To check the (remaining) recording time, press Display
(this can be done during recording).
• Dubbing will stop automatically.
3 To manually stop recording, press STOP
‹
DDUUBBBB
will go out and dubbing will stop. The minimal
track length must be four seconds, otherwise a pause
will be added to the track.
After dubbing, the display will show for several seconds.
The Total Time indications may differ slightly, but no audio
information is lost.
Note:
- Pause cannot be operated during
DDUUBBBB
.
- Dubbing will be done one track at a time, meaning that
short pauses will be added between the tracks. If you
program all tracks in their original sequence and dub at
normal speed (
DDUUBBBB
--11
), pauses will not be added.
Start dubbing at normal speed (copy a track or program)
Copying one track at a time (
DDUUBBBB
--11
) is done at normal speed.
1 For recording, press DUBB repeatedly until:
‹ DUBB-1 appears on the display and
DDUUBBBB
--11
flashes.
After some time,
RREECCOORRDD
will flash.
22
To select a track for dubbing, briefly press ∞ or § on the
CD Player one or more times.
• If you want to copy a program, you must enter the program
first before selecting
DDUUBBBB
--11
(see Programming, page 2.0)
• If you select a track using the digital key pad on the remote
control, dubbing will start automatically.
3 To start dubbing, press PLAY on the CD Player.
‹
DDUUBBBB
--11
will stop flashing and remain lighted and the
selected track or program will be copied at normal
speed. The track number and the recording time used
will be shown on the display.
• To check the (remaining) recording time, press Display.
This can be done during recording.
Note: Copy prohibited tracks will be copied analogue.
4 To stop dubbing, press STOP.
‹
DDUUBBBB
--11
will go out and the dubbing will stop.
The minimal track length must be four seconds,
otherwise a pause will be added to the track.
After dubbing, UPDATE will appear on the display for
several seconds. The Total Time indications may differ
slightly, but no audio information will be lost.
Note: Pause cannot be operated during
DDUUBBBB
--11
.
Preparing for digital recording
1 Make sure the disc is absolutely free of scratches and dust
particles.
2 Press SOURCE repeatedly until (depending on the digital
connection used):
‹ DIG DIGITAL or DIG OPTICAL appears on the
display.
• If necessary, press DUAL to switch off the
DDUUAALL
mode;
DDUUAALL
will no longer appear on the display.
3 Press AUTO/MANUAL to switch between automatic and
manual track numbering.
‹ If AUTO is selected (the preferred method),
AAUUTTOO TTRRAACCKK
will appear on the display.
• AUTO: The track increments are automatically copied from
the digital source material.
• MANUAL: Track numbers can be incremented manually by
pressing §. (minimum track length is 4
seconds).
(This can also be done in AUTO mode).
• Track numbers cannot be changed after recording.
CD SYNC SRC
SHUFFLESHUFFLE SCAN
ERASE DUAL
TIME
TRACK
OVER
TOTAL REM TIME
DUBB 1
TOTAL REM TRACKAUTO TRACK TRACK
TRACK
FINALIZE
RECORD
CD SYNC SRC
SHUFFLESHUFFLE SCAN
FINALIZE
TIMETOTAL REM TIME
REPEAT 1 REPEAT 1DIG
DUBB 1
TOTAL
PAUSE
PAUSE PROGPROGOPTANALOG
REM TRACKAUTO TRACK TRACK
DISPLAY
SOURCE
REC LEVEL
DUAL
DISPLAY
PHONES
O
P
E
N
C
L
O
S
E
C
O
M
P
A
C
T
D
I
S
C
R
E
C
O
R
D
E
R
C
D
R
7
6
5
R
E
W
R
IT
A
B
L
E
C
D
T
IM
E
R
E
P
E
A
T
1
R
E
P
E
A
T
1
D
I
G
T
O
T
A
L
P
A
U
S
E
P
A
U
S
E
R
E
M
D
U
B
B
A
U
T
O
/M
A
N
U
A
L
O
P
E
C
L
O
S
R
E
C
O
R
D
PLAY
PAUSE
STOP
F
IN
A
L
IZ
E
E
R
A
S
E
C
D
-
R
E
C
O
R
D
A
B
L
E
/
R
E
W
R
I
T
A
B
L
E
Digital recording from an external CD Player
CD SYNC SRC
SHUFFLESHUFFLE SCAN
RECORD
FINALIZE
ERASE DUAL
TIME
TRACK
OVER
TOTAL REM TIME
DUBB 1
TOTAL REM TRACKAUTO TRACK TRACK
TRACK
English
RECORDING