Filter
Top Products
15
Note:
AAUUTTOO TTRRAACCKK
works only with Consumer Sources with
a digital output signal according to the IEC 958
(consumer part) audio standard.
Start digital recording
1 With the recorder stopped, press RECORD to enter the
Record standby mode.
‹ RECORD flashes.
• If DIG also flashes, the digital connection is incorrect.
2 To start recording, press PLAY on the CD Recorder/Player
and immediately start the source (from the stop mode).
‹ RECORD lights continuously. The track number and
recording time used will be indicated on the display.
••
To record a three-second pause (silence) at the beginning
of a track, press PAUSE on the CD Recorder/Player.
• To check the (remaining) recording time, press DISPLAY.
(This can also be done during the recording.)
33
To stop recording, press STOP on the CD Recorder/Player.
‹ RECORD will go out.
• To interrupt recording, press PAUSE.
‹ RECORD starts to flash. Resume at step 2.
After recording the display will show UPDATE for several
seconds.
Note: With AUTO TRACK on, the recorder will stop
automatically. Recordings from DAT or DCC will
stop after 20 seconds silence. With AUTO TRACK off,
the AUTO STOP mode is disabled.
Preparing for synchronized digital recording
The CD-SYNC feature enables you to make fast and easy
digital recording of a CD. Track increments are automatically
detected from the digital source material. Track increments
cannot be added manually.
1 Make sure the disc is absolutely free of scratches and dust
particles.
2 Press SOURCE repeatedly until (depending on the
connection used):
‹ DIG DIGITAL or DIG OPTICAL will appear on
the display.
• If necessary, press DUAL to switch off the
DDUUAALL
mode;
DDUUAALL
will no longer appear on the display.
Start synchronized digital recording
1 With the CD Recorder/Player stopped, press CD-SYNC.
‹ On the display, CD-SYNC & SYNC appear. After a time,
RECORD starts to flash.
• If DIG also flashes, the digital connection is incorrect.
2 To start recording, press PLAY on the external digital
source.
‹ The CD Recorder/Player automatically starts to record
and RECORD lights continuously. The track number and
recording time used will be indicated on the display
• If you start the source during a track, CD-SYNC will not
start recording until the beginning of the next track.
CD SYNC SRC
SHUFFLESHUFFLE SCAN
RECORD
FINALIZE
ERASE DUAL
TIME
TRACK
OVER
TOTAL REM TIME
REPEAT 1 REPEAT 1DIG
DUBB 1
TOTAL
PAUSE
PAUSE PROGPROGOPTANALOG
REM TRACKAUTO TRACK TRACK
TRACK
CD SYNC SRC
SHUFFLESHUFFLE SCAN
RECORD
FINALIZE
ERASE DUAL
TIME
TRACK
OVER
TOTAL REM TIME
DUBB 1
TOTAL REM TRACKAUTO TRACK TRACK
TRACK
DISPLAY
SOURCE
REC LEVEL
DUAL
DISPLAY
PHONES
O
P
EN
C
LO
S
E
COMPACT DISC RECORDER CDR765
CD-SYNC
DUBB
AUTO/
M
C
D
S
Y
N
C
S
C
A
N
R
E
W
R
IT
A
B
L
E
R
E
C
O
R
D
C
D
TIME
TRACK
OVER
TOTAL
REM
TIME
REPEAT 1
REPEAT 1
DIG
DUBB 1
TOTAL
PAUSE
PAUSE
REM
TRACK
Synchronized digital recording from an
external CD player - CD-SYNC
CD SYNC SRC
SHUFFLESHUFFLE SCAN
RECORD
ERASE DUAL
TIME
TRACK
OVER
TOTAL REM TIME
DUBB 1
TOTAL REM TRACKAUTO TRACK TRACK
TRACK
FINALIZE
English
RECORDING