Filter
Top Products
GETTING STARTED
6
RQTX1220
6
ENGLISH
ENGLISH
Making the connections
Connect the AC mains lead only after all the other connections have been made.
Conserving power
The system consumes approximately 0.3 W when it is in standby mode. Disconnect the power supply if you do not use the system.
Some settings will be lost after you disconnect the system. You have to set them again.
Connect the speakers
Connect the speakers to the main unit with the terminals of the same colour.
Speakers
Terminal/
connector
colour
Front speakers White
Subwoofer Purple
Connect the FM indoor antenna
Put the antenna where reception is best.
Adhesive tape
Refer to “Using the
auxiliary input” (
Z
19) for
more information on AUX
connection.
Refer to “Using the digital output”
(
Z
19) for more information on
COAXIAL connection.
Connect the TV
VIDEO OUT terminal
COMPONENT VIDEO OUT terminals
Use these terminals for interlace or progressive output.
To enjoy progressive video
1. Connect to a progressive output compatible TV.
2. Set “VIDEO OUTPUT (I/P)” to “PROGRESSIVE” (
Z
20,
“VIDEO” menu).
Do not make the video connections through the VCR
The video cannot show correctly because of copy-guard
protection.
TV
(not included)
Video cable
(included)
TV
(not included)
Component video cables
(not included)
VKX80_GC_1En.indd 6VKX80_GC_1En.indd 6 9/22/2010 2:34:25 PM9/22/2010 2:34:25 PM