Filter
Top Products
OTHER OPERATIONS
14
RQTX1220
14
ENGLISH
ENGLISH
USB – Play and record
You can connect and play contents from your USB mass storage
device.
Preparation
Before you connect a USB mass storage device to the system, make
sure you do a backup of the data.
Do not use a USB extension cable. The unit cannot recognise USB
mass storage devices connected through a cable.
Basic playback
1 Decrease the volume and connect the USB mass storage
device to the USB port.
FM/AM
DVD/CD
4
MIC VOL
MIC 1
MIN MAX
MUSIC PORT
2 Press [
4
, USB] to start playback.
3 Press [MENU] to show the USB menu.
4 Press [
R
/
T
] to select an item and press [OK].
Refer to “Playing disc” (
Z
11 to 13) for other operations.
Compatible devices
• USB mass storage devices that support bulk-only transfer.
• USB mass storage devices that support USB 2.0 full speed.
Supported format
File format File extension
Still pictures JPEG
1
.JPG
.JPEG
.jpg
.jpeg
Audio MP3
WMA
.MP3
.WMA
.mp3
.wma
Video MPEG4
2
.ASF .asf
1
Some files cannot be played due to how the files were made.
2
For Panasonic D-Snap/DIGA
Note:
Maximum number of groups (folders) 255
Maximum number of contents (files) 4000
Maximum characters in group or content name 28
• CBI (Control/Bulk/Interrupt) transfer is not supported.
• NTFS file system is not supported (only FAT 12/16/32 file system is
supported).
• Depending on the sector size, some contents can fail to work.
USB mass
storage device
(not included)
Recording
Panasonic cannot be held responsible on the action of consumer
to record copyrighted contents which can cause copyright
infringement.
1 Select the source you want to record.
Disc:
1. Put in the disc.
2. Press [
4
, DVD/CD] and then press [
8
] two times.
Record specified tracks (
Z
11, “Program playback”).
Tape:
1. Press [TAPE].
2. Put in the cassette tape.
3. Press [
4
, PLAY] to start playback.
Radio:
Tune in to the radio station (
Z
16).
Music port or AUX:
Connect and play the equipment (
Z
19).
Microphone:
Connect the microphone (
Z
18).
2 Press [
7
, USB] to start recording.
The USB recording indicator blinks.
The name of the group that keeps the recording is shown.
3 Press [
8
] to stop recording.
“WRITING” is shown.
The recorded audio contents are kept in a group named “REC_DATA”
in the USB mass storage device.
USB
ROOT/REC
_
DATA
AUX001
DISC001
FM001
FM002
REC
_
DAT2
AUX003
OK
RETURN
Note:
• All recordings are in .mp3 format.
• A new group is added or made each time you do a recording.
• You cannot do recording or delete contents when you are in
"RESUME STOP" mode.
• You cannot do recording when you are using random playback
mode.
• Repeat playback mode is off during recording.
• Microphone input cannot be recorded during CD-DA to USB
recording.
Subgroup that
keeps MP3
contents recording
from data discs
(
Z
15)
VKX80_GC_1En.indd 14VKX80_GC_1En.indd 14 9/22/2010 2:34:43 PM9/22/2010 2:34:43 PM