Filter
Top Products
REFERENCES
25
RQTX1220
25
ENGLISH
ENGLISH
General operation Page
You have forgotten your ratings
password.
• Reset all the settings to factory preset.
1. Press [
4
, DVD/CD] and then press [
8
].
2. Press [
8
] on the main unit and [
10] on the remote control at the same time.
“INIT” shows on the display panel.
–
Other equipment operates with the
supplied remote control.
• Change the remote control mode. 21
Disc operation Page
Playback starts slowly. • Playback starts slowly when an MP3 content has still picture data. Even after the content
starts, the correct play time will not be shown.
•
This is usual on DivX video.
–
–
Playback does not start.
• Playback of MPEG4 that contains still picture data is not possible.
• If a disc contains CD-DA and other formats, correct playback is not possible.
•
If playing DivX VOD content, refer to the website where you purchased it.
(Example: www.divx.com/vod)
–
–
23
Groups deeper than the eighth
layer on a data disc are not shown
correctly.
• Groups deeper than the eighth layer are shown as the eighth layer.
22
A menu screen shows during skip
or search.
• This is usual for Video CDs. –
Playback control menu does not
show.
with playback control (PBC).
• Press [
8
] two times and then press [
4
, DVD/CD].
–
The program and random playback
functions do not work.
• These functions do not work with some DVD-Videos.
–
Programmed items are not played.
• Some items cannot be played even if you have programmed them.
–
No subtitles. • Show the subtitles (“SUBTITLE” in Menu 1).
• It is possible that the subtitles are not shown because of the disc.
13
–
Cannot select alternative
languages.
• Select from the menu of the disc if one is available. –
Point B is automatically set. • The end of an item becomes point B when it is at the end. 13
The SETUP menu cannot be
accessed.
• Select “DVD/CD” as the source.
• Cancel the program and random playback.
10
11
Sound Page
No sound. • Examine the connections.
• Increase the volume.
• There is possibly a pause in the sound when you change the play speed.
•
Audio is possibly not output because of how the contents are made.
6
8
13
–
Sound is distorted. • Noise can occur when playing WMA. –
Humming heard during playback. • An AC mains lead or a fluorescent light is near the cables. Keep other appliances and
cords away from the cables of this system.
–
Picture Page
Picture is distorted. • It is common to experience some distortion during “SEARCH”.
• Make sure that the system is connected directly to the TV, and is not connected through
a VCR.
•
Change the “SOURCE SELECT” in Menu 2.
11
6
13
No picture. • Examine the connection.
• Make sure that the video input mode of the TV is correct.
6
–
A defective TV display or faded
colours.
• The system and TV are using different video systems.
– Use the multi-system or NTSC TV.
• The system used on the disc does not complement your TV.
– Videos on PAL discs cannot be correctly shown on an NTSC TV.
– This system can convert NTSC signals to PAL 60 to be shown on a PAL TV
(“NTSC DISC OUT” in “VIDEO” menu).
–
20
Picture stops.
• Picture can stop if the DivX contents are more than 2 GB.
–
Menus not shown correctly. • Change the zoom ratio to “NORMAL” in “ZOOM” in Menu 2.
• Change the “TV ASPECT” in “VIDEO” menu.
13
20
VKX80_GC_1En.indd 25VKX80_GC_1En.indd 25 9/22/2010 2:34:47 PM9/22/2010 2:34:47 PM