Filter
Top Products
OTHER OPERATIONS
20
RQTX1220
20
ENGLISH
ENGLISH
Changing system settings
EASY SETUP allows successive settings of the items in the shaded area.
“DISC” menu
CURRENT SETTINGS Show the current setting of the items in this menu.
AUDIO
Change the audio language.
ENGLISH FRENCH SPANISH GERMAN RUSSIAN
HUNGARIAN CZECH POLISH ORIGINAL
1
OTHER ----
2
SUBTITLE
Change the subtitle language.
AUTO
3
ENGLISH FRENCH SPANISH GERMAN
RUSSIAN HUNGARIAN CZECH POLISH OTHER ----
2
MENUS
Change the language for disc menus.
ENGLISH FRENCH SPANISH GERMAN RUSSIAN
HUNGARIAN CZECH POLISH OTHER ----
2
RATINGS
Set a ratings level to limit DVD-Video
playback.
Setting ratings
0 LOCK ALL: To prevent playback of discs without ratings levels.
1 to 7: To prevent playback of DVD-Video with the same ratings recorded on them.
8 NO LIMIT
When you set the ratings level, a password screen is shown.
Follow the on-screen instructions.
Do not forget your password.
A message screen is shown if a DVD-Video with higher ratings level is played.
Follow the on-screen instructions.
PASSWORD
Change the password for “RATINGS”
(
Z
above).
1. Select “CHANGE” and press [OK].
2. Input the current password with the numeric buttons, then press [OK].
3. Input the new password with the numeric buttons, then press [OK].
If “VERIFY” is shown, make sure that the new password is correct and input it again.
1
The original language designated on the disc is selected.
2
Input the applicable code from the “Language code list” (
Z
23).
3
If the language selection for “AUDIO” is not available for the disc played, the subtitles in that language will be shown (if available on the disc).
“VIDEO” menu
CURRENT SETTINGS Show the current setting of the items in this menu.
TV ASPECT
Change the setting to suit your TV and
preference.
16:9: Widescreen TV (16:9)
4:3PAN&SCAN: Regular aspect TV (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless
prohibited by the disc).
4:3LETTERBOX: Regular aspect TV (4:3)
Widescreen picture is shown in the letterbox style.
TIME DELAY
When connected with an AV amplifier
and Plasma TV, adjust if the audio is
out of sync with the video.
0 ms 20 ms 40 ms
60 ms 80 ms 100 ms
NTSC DISC OUT
Change PAL60 or NTSC output when
you play NTSC discs.
NTSC: Output signals from NTSC discs remains as NTSC.
PAL60: NTSC discs can be viewed on PAL TV.
STILL MODE
Specify the type of picture shown
when in pause mode.
AUTO
FIELD: The picture is not blurred, but the picture quality is lowered.
FRAME: Overall quality is high, but the picture is blurred.
VIDEO OUT (I/P)
Select “PROGRESSIVE” only if
connecting to a progressive output
compatible TV.
INTERLACE
PROGRESSIVE
When you select “PROGRESSIVE”, a message screen will appear.
For progressive output, press [
R
] and then press [OK].
To cancel, press [
, RETURN].
1 Press [
4
, DVD/CD].
2 Press [SETUP] to show the SETUP menu.
3 Press [
R
/
T
] to select the menu and press [OK].
To go back to the previous menu, press [
, RETURN].
4 Press [
R
/
T
] to select an item and press [OK].
5 Press [
R
/
T
] to make the setting and press [OK].
6 Press [SETUP] to close the screen.
• The settings stay intact even if you put the system on standby
mode.
• Underlined items are the factory settings in the menu.
VKX80_GC_1En.indd 20VKX80_GC_1En.indd 20 9/22/2010 2:34:46 PM9/22/2010 2:34:46 PM