Panasonic SC-HT820V Speaker System User Manual


 
45
RQT7388
See below for details.
[DVD-A] [DVD-V] [VCD] [CD]
Available sound settings:
Dolby Pro Logic II, Subwoofer level, Center Focus, Sound Field
Control, Super Surround
After making the sound field or sound quality settings
Press and hold
[SHIFT]i[C.S.M].
Recall the settings
The unit recalls the settings when you play the disc again.
The settings are replaced if you change them.
When you store settings for the 31st disc, the settings for the earliest
disc are cleared.
Press [SHIFT]i[C.S.M] while “CSM” is displayed and the settings
return to those that were current before the settings were recalled.
Press [SHIFT]i[C.S.M] while “CSM” is out and you are playing a
disc for which you stored settings and those settings are recalled.
You can output the down-mixed 2 channel signal when necessary
(e.g. when you intent to record 5.1ch sound on other recording
equipment).
Press
[SHIFT]i[MIX 2CH].
To cancel
Press [SHIFT]i[MIX 2CH] again.
[Note]
When “D.MIX” flashes on the display, the disc contains multiple-
channel signals that cannot be down-mixed. [DVD-A]
Press [SUBWOOFER LEVEL].
SUB W 1>SUB W 2>SUB W 3>SUB W 4 (factory preset)
^--------------------------------------------------------------}
This is the one of ways to get the appropriate surround effect. Adjust
the speaker level to the same level as the front speakers.
1 Press [SHIFT]i[TEST] to output a test
signal.
Lch: Front left
Cch: Center
Rch: Front right
RSch: Right surround
LSch: Left surround
There is no output from SW (subwoofer) channel.
2 Press [VOLUME, r] or [s] to set the
volume level normally used for
listening.
3 Press [3] (increase) or [4] (decrease)
to adjust the speaker level for each
speaker.
C, RS, LS: j6 dB to i6 dB
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers
While outputting the test signal, press [21].
To stop the test signal
Press [SHIFT]i[TEST] again.
To adjust speaker level during play
1 Press [CH SELECT] to select the speaker.
L>C>R>RS>LS>SW
^-----------------------------------------}
SW: Subwoofer
You can only adjust SWch if the disc includes a subwoofer
channel.
SWch does not appear on the display and is not adjustable
when Dolby Pro Logic II or Dolby Pro Logic turned on.
2 Press [3] (increase) or [4] (decrease) to adjust the
speaker level for each speaker.
C, RS, LS, SW: j6 dB to i6 dB
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers
During play, press [21].
only
Custom Sound Memory
Stores up to 30 sound setting (one setting per disc).
only
Down-mixing
Down-mixes multi-channel signals to 2 channels.
Subwoofer level
Adjusts the amount of bass.
Speaker level adjustments
VOLUME
123
456
78
0
100
9
CH
NAVI
CANCEL
SPEEDPROG
SKIP
SLOW/SEARCH
MENU
ENTER
DIRECT
NAVIGATOR
TOP MENU
RETURN
OSD/
DISPLAY
TV
FM/AMDVD/VHS
DVD TV
VHS
TUNER
DISC 1 DISC 2 DISC 3
DISC 4
PICTURE MODE
SETUP
OPEN/CLOSE/EJECT
JET REW CD MODE
DISC 5
S10
ENTER
PLAY
LIST
TV VOL
TV VOL
RESET
TV/VIDEO
PA GE
GROUP
MIX 2CH
SUBTITLE
REPEAT
PLAY MODE
MULTI RE-MASTER
SUBWOOFER LEVEL
C.S.M
SFC
C.FOCUS
SUPER SRND
PROGRESSIVE
MUTING
POSITION
MEMORY ZOOM
QUICK REPLAY
REC
SLEEP
PL
AUDIO
TEST
CH SELECT
SHIFT
INPUT SELECTOR
SHIFT
C.S.M
SFC
r
MIX 2CH
SUBTITLE
r
SHIFT
MULTI RE-MASTER
SUBWOOFER LEVEL
TEST
CH SELECT
r
SHIFT
Custom Sound Memory
Down-mixing
Subwoofer level
CSM
Speaker level adjustments
DVD
DVD
7388en.book 45 ページ 2003年12月22日 月曜日 午後9時39分