Filter
Top Products
34
RQT7388
Timer recording
You can create up to 16 timer recording programs. You can set the timer to record an individual
program up to a month in advance, record at the same time on the same day every week, or at
the same time daily.
Preparation
≥Make sure the unit’s clock is correct (➜ page 38 to adjust it if necessary).
≥Insert a tape, ensuring its tab is in place (➜ page 5).
See below for details.
1 While stopped, press [PROG].
The timer-programming screen appears.
2 Press [PROG] to select an available
line and press [ENTER].
3 Select “DATE” with [21] and change
it with [34].
The date changes as follows:
A.Current date
l;:
l Next day up to one month later minus one day
l;:
l Weekly timer: SU–SA > MO–SA > MO–FR
l;:
a.Daily timer: SU > MO > TU > WE > TH > FR > SA
4 Select “CH” with [21] and change it
with [34].
Select “AU” when recording from other equipment
(➜ page 33).
5 Select “ON” with [21] and change
the start time with [34].
6 Select “OFF” with [21] and change
the end time with [34].
7 Press [SPEED] to change the tape
speed.
SP>EP>VP>A
§
^"""""""-""b
§
Auto SP/EP change function ➜page 35
8 If the Jet Navigator is on (➜ page 36),
Select a category.
Press [1] to select a category column. Press [34] to enter
the category selection menu. Then select a category with
[3421], and confirm with [MENU].
You can also set and change the category in the navigator list
(➜ page 37).
Repeat steps 2 to 8 to make further timer programs.
9 Press [F] to put the unit on timer
recording standby.
“F” lights on the unit’s display.
To release the unit from timer recording standby
Press [F].
To stop recording
Press [F].
For your reference
The timer works whether the unit is on or not, so you can play DVDs
or listen to the radio (➜ page 33). Switch the unit to standby if you
are finished.
Timer recording