Filter
Top Products
6
This audio mixer has four mono input lines, four stereo input lines, one mono/stereo input line and three output lines.
FEATURES
● Three modes applicable to different amplification systems
DIP switches at the rear panel support the following amplification systems:
• Mode 1: One-circuit amplification (stereo: 1 and mono: 1)
• Mode 2: Two-circuit amplification (stereo: 1 or mono: 1)
• Mode 3: Three-zone amplification (stereo: 1 and mono :2)
● Integrated level control of microphone sounds or BGM
The mono or stereo output level is adjustable with one knob: the MONO OUT or STEREO OUT knob.
● Customizable amplification systems
• The SUB OUTPUT connector can be assigned to a desired input line from among the STEREO INPUT jack 1 to 4, the con-
nectors MONO INPUT 1 to 4, and the MULTI IN STEREO/MONO jack. Refer to p. 18 Output Line Setting for SUB OUTPUT
for details.
• The MULTI INPUT* ST and the MULTI INPUT MONO jacks serve as additional stereo or mono input lines, as they can be
assigned to any output line.
• The LINE IN* jack at the front panel can be connected to a personal computer, MD player or CD player.
* The signal from MULTI INPUT ST/MONO jack(s) and the LINE IN jack are unavailable at the same time. (The LINE IN jack
has a priority to MULTI IN.)
● Basic functions
• Head amplifier with discrete construction (mono input)
• Electronically balanced output circuit
• Design for noise reduction and sound quality improvement (Refer to p. 38 SPECIFICATIONS.)
• Stereo input auto mute switch, used for information broadcasting in a shop
• Acrylic cover is attachable on the front panel to prevent wrong operation.
Note: In these Operating Instructions, "Mono" and "mono" stand for "monophonic".
PREFACE