Onkyo TX-NR900 Stereo Receiver User Manual


 
54
2-6. Listening Mode Preset Sub-menu
With the TX-NR900/900E, you can set a different listening mode for
each different signal type that comes from each input source. For
example, if your DVD player also plays compact discs and the DVD
video signal is Dolby Digital and the compact disc signal is PCM,
then you can set a different listening mode for each.
This is especially convenient if you frequently play the same types of
movies or music.
* The 5.1-channel digital surround format has a variety of versions
including Dolby Digital and DTS. The 5.1- channel digital
surround format enables the individual recording and playing of
five full-range (20 Hz to 20 kHz) channels (left and right front,
center, and two surround channels) plus an LFE channel (Low
Frequency Effect) for the low-range effect sound. It will create a
realistic sound that can be heard in the theaters and concert halls.
Advanced Menu
2.Input Setup
2-6.ListeningMode Preset
a.Analog/PCM
:Stereo
b.PCM fs=96k :Stereo
c.Dolby D :Dolby D
d.DTS :DTS
e.D.F.2ch
:PLII
f.D.F.Mono:Mono
Quit:|SETUP|
Input:DVD
Input:DVD
Once 10 characters are entered, you will automatically return to the
previous screen. If the name is completed before you enter 10
characters, enter spaces until 10 characters are entered.
To change an existing character, move the cursor backward with the
RETURN button or forward with the ENTER button to the location
of the mistaken character and then enter the desired character as
explained above. To erase a character, enter a blank space in its
place. After you have completed the name, press the ENTER button
until you return to the Character Input Sub-menu.
2-5. IntelliVolume Sub-menu
This sub-menu allows you to adjust for the volume differences
between your various input source components.
a. IntelliVolume
When switching input sources, you may find that the output level for
different components or input sources connected to the TX-NR900/
900E is different even though the main volume setting is the same.
Under normal circumstances, you would then have to change the
volume setting each time you change the input source. This Intelli
Volume setting allows you to preset a volume level for each input
source separately so that when you do switch from one input source
to another, the TX-NR900/900E adjusts the volume accordingly and
the volume stays the same. To set the Intelli Volume, simply select
an input source at the front panel, and if that source is quieter than
other sources, increase its decibel level with the
cursor button, or
if it is louder than other sources, decrease its decibel level with the
cursor button.
The Intelli Volume can be adjusted between 12 and +12 decibels.
Advanced Menu
2.Input Setup
2-5.IntelliVolume Setup
a.IntelliVolume
: 0dB
Quit:|SETUP|
Input:DVD
Input:DVD
Input Setup