Filter
Top Products
13
Index parts and facilities
SEND/LEARN indicator [7]
Lights red when signals are sent by the remote controller. It also
flashes when a button is pressed when the battery power is low.
ON/STANDBY button [30, 43]
ON: Press to turn on the TX-NR900/900E.
STANDBY: Press to place the TX-NR900/900E in the standby
state.
Be aware that pressing the STANDBY button only places the TX-
NR900/900E in standby and does not turn the power completely off.
SLEEP button [32]
Press to set the sleep function.
The SLEEP button enables you to set the TX-NR900/900E to turn
off automatically after a specified time period.
MACRO 1, 2 button [76, 77]
Press to program or execute the macro function.
MODE buttons and indicators [31, 66-67]
Press to select the component to be operated by the remote
controller. When a MODE button is pressed, it will light for 8
seconds. The selected MODE button will also light whenever any
other operation button is pressed.
RETURN button [45]
Press to enter the selected setting and return to the previous menu.
CH button [37]
Press to select a preset channel for the tuner.
CH SEL button [34]
Press to select a speaker channel when adjusting the speaker level.
AUDIO SEL button [35]
Press to select the audio input signal.
LEVEL / buttons [34, 43]
Press to adjust the volume of the speaker selected using the CH SEL
button.
Operation buttons [66-69, 73]
Press to operate other devices connected to the TX-NR900/900E.
INPUT SELECTOR buttons [31, 37, 43]
Press to select an input source.
Same as the input selector buttons on the front panel of the TX-
NR900/900E. The input source for each button is given here.
DVD:DVD, CD:CD, V1:VIDEO1, V2:VIDEO2, V3:VIDEO3,
V4:VIDEO4, V5:VIDEO5, TAP:TAPE, TUN:FM/AM,
PH:PHONO.
Listening mode buttons [33, 35]
You can select a listening mode.
Re-EQ button [59, 62]
Depending on the listening mode, you can turn the Re-EQ function
on or off.
DISPLAY button [34]
For changing the display in the front display.
DIMMER button [34]
Adjusts the display brightness.
There are three settings available: normal, dark, and very dark.
LIGHT button
Press to turn on and off the lights in the buttons of the remote
controller.
SETUP button [45]
Press to display the Setup Menu on the TV screen and in the display.
Press again to exit the menu.
/ / / , ENTER button [45]
When in the Setup Menu, press the upper and lower arrow buttons to
select an item, press the right and left arrow buttons to select
parameter values or modes, and press the ENTER button to advance
to the next item.
VOL button [31]
Press to adjust the volume.
TEST button [50]
This button is used to set the speaker output levels. Use this button in
conjunction with the LEVEL
/ and CH SEL buttons to calibrate
the speakers levels without entering the Setup Menu.
MUTING button [32]
Press to activate the mute function.
ZONE 2 button [43]
Press to perform operations on the remote zone.