Filter
Top Products
51
Input Setup
2. Input Setup Menu
This menu allows you to make the various settings concerning the
signals input from the various input sources that you use with the
TX-NR900/900E. The settings made in this menu are valid for the
input source that is currently selected with the input source buttons at
the front panel and, therefore, these settings are made separately for
each input source. Each input source may have a great number of
settings that are difficult to keep track of, so we recommend making
a chart to record what you have set and for which component to
prevent confusion later.
When NET AUDIO is not selected as the input source
Advanced Menu
2.Input Setup
1.Digital Setup
2.Multichannel Setup
3.Video Setup
4.Character Input
5.IntelliVolume
6.Listening Mode Preset
|ENTER|Quit:|SETUP|
Input:DVD
Advanced Menu
2.Input Setup
2-1.Digital Setup
a.Digital Input
:COAX1
b.Digital Format
:All
Quit:|SETUP|
Input:DVD
Input:DVD
2-1. Digital Setup Sub-menu (When NET AUDIO
is not selected as the input source)
This sub-menu concerns the input of digital signals from input
sources and if these settings are incorrectly made, the digital audio
signals may not be properly output, or not heard at all. This sub-
menu will not appear if the selected input source button is AM or
FM. It cannot be accessible if “Yes” is selected in 2-2. Multichannel
Setup Sub-menu and “Multichannel” is selected in the AUDIO
SELECTOR. Furthermore, since VIDEO 5 is fixed to the optical
digital terminal on the front panel, this sub-menu will not appear if
VIDEO 5 is selected.
Initial settings for each input source
Input source Digital input
CD OPT 1
PHONO
TUNER
TAPE OPT 2
VIDEO 1 COAX 2
VIDEO 2 COAX 3
VIDEO 3 OPT 3
VIDEO 4 OPT 4
VIDEO 5 OPTICAL on front panel (fixed)
DVD COAX 1
NET AUDIO
---- : Available for digital input but not set in initial settings.
: Not available for digital input.
a. Digital Input
This setting tells the TX-NR900/900E which input source button on
the front panel is connected with which digital input jack on the rear
panel. To perform this setting, you must first select a digital input
source at the front panel and then set the name of the digital input
jack it is connected to with this setting.
For example, if the input source selected at the front panel is CD and
the compact disc player is connected to DIGITAL INPUT OPT 1,
then select “OPT1” here. If the input source selected is not connected
to a digital input, then select “----.”
OPT1-4: Select if the input source is connected to any of the
DIGITAL INPUT OPT jacks 1 through 4.
COAX1-3: Select if the input source is connected to any of the
DIGITAL INPUT COAX jacks 1 through 3.
----: Select if the input source is not from a digital input jack.