Filter
Top Products
24
Optional Tuner Boards
The following optional tuner boards are available for the T-4555:
•For T-4555 European model: C-DAB board (AM/FM/DAB tuner)
•For T-4555 U.K. model: C-AMFM board (AM/FM tuner)
Caution:
• Before installing or removing a board, be sure to turn off the T-4555 and unplug the power cord from the wall outlet.
Failure to do so could seriously damage your equipment.
In most cases, you do not need to perform the following
procedure. However, if the purchased board is the
worldwide model and you plan to use it in Europe or
U.K., you must change the AM Frequency setting to
9 kHz steps. Follow the procedure below after you
install the board.
Product number: C-AMFM
Provides terminals for FM and AM tuners.
Product number: C-DAB
Provides terminals for DAB, FM stereo and AM tuners.
Board slot
AM Frequency Step Setup
1
Press the [SETUP] button.
2
Use the Up and Down Arrow
[ ]/[ ] buttons to select “Hard-
ware Setup,” and then press
[ENTER].
With some tuner boards, there will
only be one option available and you
won’t need to use the Up and Down
Arrow [ ]/[ ] buttons.
Remote controller
Remote controller
3
Use the Up and Down Arrow
[ ]/[ ] buttons to select “AM
Freq.”
With some tuner boards, there will
only be one option available and you
won’t need to use the Up and Down
Arrow [ ]/[ ] buttons.
4
Use the Left and Right Arrow
[ ]/[ ] buttons to select:
9 kHz: Select if 9 kHz steps are used
in your area.
10 kHz: Select if 10 kHz steps are
used in your area.
5
Press the [SETUP] button.
Remote controller
Remote controller
Remote controller