Filter
Top Products
19
Listening to DAB Digital Radio
Selecting DAB for the Very First Time
The very first time you select DAB, the Auto Tuning
function automatically scans the DAB Band III and
L-Band for the multiplexes (i.e., stations) available in
your area.
Once the scanning process is complete, the first station
that was detected is selected.
Using the Auto Tuning Function Manually
If a new DAB station is introduced, or you move to a
new area, you can run the Auto Tuning function again.
To cancel Auto Tuning, press the [AUTO SCAN] button
again.
Selecting DAB Stations
Press the [BAND] button repeat-
edly to select DAB.
The indicator lights up.
When tuned into a DAB station, the
TUNED indicator appears.
AUTO SCAN
AUTO SCAN BAND
TUNING/CH
TUNING/CH
BAND
/
Remote controller
Station name
Tuned indicatorDAB indicator
To start the Auto Tuning function,
press the [AUTO SCAN] button.
The number of stations found and the
scanning progress are shown on the
display.
Use the TUNING/CH [ ]/[ ] but-
tons to select a DAB station.
If a secondary service is available, a
right angle bracket (>) is displayed.
Press the Right Arrow [ ] button to
listen to the secondary service.
While the secondary service is
selected, a left angle bracket (<) is dis-
played and SECONDARY indicator
lights up. Press the Left Arrow [ ]
button to return to the primary service.
When you select a station that you’ve
selected a lot in the past, the letter F
(short for Favorite) is displayed.
If you select a station that cannot be
received properly, a question mark (?)
is displayed.
Remote controller
Remote controller
“>”
“<”
“SECONDARY”
“F”
“?”