Filter
Top Products
21
Listening to DAB Digital Radio—Continued
Scan Mode
This setting determines which DAB bands are scanned
by the Auto Tuning function (see page 19).
Use the Left and Right Arrow [ ]/[ ] buttons to select
the following options, and then press [ENTER].
UK: Band III (11B–12D).
WorldW (Worldwide): Band III (5A–13F) and
L-Band (LA–LW). This is the default setting.
DRC Value
With the DRC (Dynamic Range Control) setting, you
can reduce the dynamic range of DAB digital radio so
that you can still hear quiet parts even when listening at
low volume levels—ideal for listening to the radio late at
night when you don’t want to disturb anyone.
Use the Left and Right Arrow [ ]/[ ] buttons to select
from the following options, and then press [ENTER].
1 (default): Large reduction in dynamic range.
1/2: Small reduction in dynamic range.
0: DRC off.
Band
With the Band setting, you can choose the DAB band
you want to use, and display the current reception qual-
ity and the reception quality necessary to decode the
current multiplex.
Use the Left and Right Arrow [ ]/[ ] buttons to select
from the following options, and then press [ENTER].
Band III: 5A–13F
L-Band: LA-LW
Display example:
You can adjust the position and direction of the DAB
antenna while monitoring the signal strength on the dis-
play.
To make “Good” appear, adjust the antenna to get the
best signal strength.
Channel If reception is poor, “Bad” is
displayed. If reception is
good, “Good” is displayed.