Filter
Top Products
51
First Time Setup
—Continued
If you connect a component to the AV controller’s analog
multichannel input, you must assign that input to an
input selector. For example, if you connect your DVD
player to the MULTI CH input, you must assign it to the
DVD input selector.
If you connect a component to the AV controller’s bal-
anced input, you must assign that input to an input
selector. For example, if you connect your CD player to
the BALANCED input, you must assign it to the CD
input selector.
Notes:
•To listen to the component connected to the multi-
channel input, press the [AUDIO SEL] button repeat-
edly to select Multich (see page 78).
• This procedure can also be performed on the AV con-
troller by using its [SETUP], [ENTER], and arrow
buttons.
Analog Input Setup
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [ ]/[ ]
buttons to select “1. Input/Output
Assign,” and then press [ENTER].
The Input/Output Assign menu
appears.
3
Use the Up and Down [ ]/[ ]
buttons to select “5. Analog
Input,” and then press [ENTER].
The Analog Input menu appears.
INPUT
SELECTOR
DISPLAY MUTING
G
U
I
D
E
E
X
I
T
PREV
CH
DIMMER
CDR/MD
SAT
TAPE/AMP
SLEEP
MACRO
REMOTE MODE
ENTER
T
O
P
M
E
N
U
M
E
N
U
VOL
CH
DISC
ALBUM
TV
VCR
CABLE DOCK
DVD
RECEIVER
CD
12
3
ZONE
3
ZONE
2
+
-
S
E
T
U
P
R
E
T
U
R
N
2, 3
2–4
1
1, 5
RECEIVER
S
E
T
U
P
ENTER
ENTER
ENTER
ENTER
1-5.Analog Input
Multich
DVD
Balance
Balance Input
4
Use the Up and Down [ ]/[ ]
buttons to select “Multich,” and
use the Left and Right [ ]/[ ]
buttons to select an input selec-
tor.
You can assign the multichannel input
to the following input selectors: DVD,
VCR/DVR, CBL/SAT, GAME/TV,
AUX 1, AUX 2, TAPE, CD, or
PHONO.
5
Use the Up and Down [ ]/[ ]
buttons to select “Balance,” and
use the Left and Right [ ]/[ ]
buttons to select an input selec-
tor.
You can assign the balanced input to the
following input selectors: DVD,
VCR/DVR, CBL/SAT, GAME/TV,
AUX 1, AUX 2, TAPE, CD, or
PHONO.
6
Use the Up and Down [ ]/[ ]
buttons to select “Balance Input,”
and use the Left and Right
[ ]/[ ] buttons to select:
Stereo
: Select if the source is stereo
and you’ve connected it to
the BALANCED L and R
INPUT XLR jacks.
Mono
: Select if the source is mono
and you’ve connected it to
the BALANCED L INPUT
XLR jack.
7
Press the [SETUP] button.
Setup closes.
ENTER
ENTER
ENTER
S
E
T
U
P