Onkyo HT-R993 Stereo Receiver User Manual


 
17
1 24 9 F G H I K6 L3 578 J
N
M
R STP QO
(European models)
(European models)
Front Panel
1
z
ON/STANDBY button: Turns the unit on or into
standby mode.
2
BLUETOOTH indicator: Flashes while pairing with a
Bluetooth-enabled device is in progress and stays lit
when pairing is completed.
3
Wi-Fi indicator: Lights when the unit is connected to
the wireless LAN router.
4
ZONE2 button: Controls the multi-zone function.
5
Remote control sensor: Receives signals from the
remote controller.
6
OFF button: Switches the multi-zone function to off.
7
Display
8
LISTENING MODE buttons: Allows you to select the
listening mode.
9
DIMMER button (North American models): Switches
the brightness of the display.
RT/PTY/TP button (European models): Can be used
when receiving the station transmitting text information.
F
MEMORY button: Registers or deletes a station.
G
TUNING MODE button: Switches the tuning mode.
H
DISPLAY button: Switches the information on the
display.
I
HOME button: Displays the HOME menu.
J
Cursor buttons,
l
TUNING
j
button,
d
PRESET
c
button and ENTER button: Moves the cursor and
confirms the selection. When listening to AM/FM
broadcasting, tune in to the station with
l
TUNING
j
or
select the registered station with
d
PRESET
c
.
K
RETURN button:
Returns the display to the previous
state.
L
MASTER VOLUME: Allows you to adjust the volume.
M
MUSIC OPTIMIZER button/indicator (North American
models): Turns on/off the MUSIC OPTIMIZER function
that improves the quality of the compressed audio.
PURE AUDIO button and indicator (European
models): Switches to the Pure Audio listening mode.
The indicator lights in the Pure Audio listening mode.
N
PHONES jack: Stereo headphones with a standard plug
are connected.
O
AUX INPUT HDMI/MHL jacks: An HD video camera or
MHL-enabled mobile device is connected. It is possible
to send video and audio of an MHL-enabled mobile
device.
P
TONE and Tone Level buttons: Adjusts the high tone
and low tone.
Q
Input selector buttons: Switches the input to be
played.
R
USB port: A USB storage device is connected so that
music files stored in it can be played.
S
SETUP MIC jack: The supplied speaker setup
microphone is connected.
T
HYBRID STANDBY indicator: Lights if the unit enters
standby mode when the HDMI Through, network
standby and Wakeup via Bluetooth functions are
enabled.