Onkyo HT-R510 Stereo Receiver User Manual


 
47
Specifications
AMPLIFIER SECTION
VIDEO SECTION
TUNER SECTION
FM
AM
GENERAL
REMOTE CONTROL
Specifications and features are subject to change without notice. Power sup-
ply and voltage vary depending on the area in which the unit is purchased.
Continuous Average Power output (FTC)
All channels: 100 watts per channel min. RMS at
8 , 2 channels driven from 20 Hz
to 20 kHz with no more than 0.08%
total harmonic distortion.
Dynamic power output:
230 watts
× 2 at 3
170 watts
× 2 at 4
115 watts
× 2 at 8
Total Harmonic Distortion: 0.08% at rated power
0.08% at 1 watt output
IM Distortion: 0.08% at rated power
0.08% at 1 watt output
Damping Factor: 60 at 8
Input Sensitivity and Impedance
DIGITAL INPUT (OPTICAL 1, 2): 0.5 Vp-p, 75
DIGITAL INPUT (COAXIAL): 0.5 Vp-p, 75
LINE (CD, VIDEO 1, 2, 3, TAPE): 200 mV, 47 k
Multichannel Input
(DVD FRONT L/C/R, SURR L/R): 200 mV, 47 k
(SUBWOOFER): 36 mV, 47 k
Output Level and Impedance
Rec out (TAPE, VIDEO 1): 200 mV, 470
Pre out (SUBWOOFER): 1 V, 470
Frequency Response: 10 Hz to 100 kHz,
+1/–3 dB (Direct mode)
Tone Control
Bass: ±12 dB at 20 Hz
Treble: ±12 dB at 20 kHz
Signal-to-Noise Ratio: CD/TAPE: 100 dB
(IHF-A, Direct mode)
Muting: –50 dB
Input Sensitivity and Impedance
VIDEO (DVD, VIDEO 1, 2, 3): 1 Vp-p, 75
S VIDEO (DVD, VIDEO 1, 2, 3): 1 Vp-p, 75 (Y)
0.28 Vp-p, 75 (C)
COMPONENT VIDEO 1, 2: 1 Vp-p, 75 (Y)
0.7 Vp-p, 75 (P
B
, P
R
)
Output Level and Impedance
VIDEO (VIDEO 1, 2, MONITOR): 1 Vp-p, 75
S VIDEO (VIDEO 1, 2, MONITOR): 1 Vp-p, 75 (Y)
0.28 Vp-p, 75 (C)
COMPONENT VIDEO OUT: 1 Vp-p, 75 (Y)
0.7 Vp-p, 75 (P
B
, P
R
)
Tuning Range: 87.50-108.00 MHz (100 kHz steps)
Usable Sensitivity
Mono: 11.2 dBf, 1.0 µV (75 , IHF)
0.9 µV (75 , DIN)
Stereo: 17.2 dBf, 2.0 µV (75 , IHF)
23 µV (75 DIN)
50 dB Quieting Sensitivity
Mono: 17.2 dBf, 2.0 µV (75 )
Stereo: 37.2 dBf, 20.0 µV (75 )
Capture Ratio: 2.0 dB
Image Rejection Ratio: 40 dB
IF Rejection Ratio: 90 dB
Signal-to-Noise Ratio
Mono: 76 dB
Stereo: 70 dB
Alternate Channel Attenuation: 55 dB
Selectivity: 50 dB (DIN)
AM Suppression Ratio: 50 dB
Total Harmonic Distortion
Mono: 0.2%
Stereo: 0.3%
Frequency Response: 30 Hz-15 kHz, –1.0 dB
Stereo Separation: 45 dB at 1 kHz
30 dB at 100 Hz-10 kHz
Tuning Range: 530-1,710 kHz (10 kHz steps)
Usable Sensitivity: 30 µV
Image Rejection Ratio: 40 dB
IF Rejection Ratio: 40 dB
Signal-to-Noise Ratio: 40 dB
Total Harmonic Distortion: 0.7%
Power Supply and Power Consumption:
AC 120 V, 60 Hz 5.2 A
Dimensions (W
× H × D): 17-1/8" × 5-7/8" × 14-13/16"
435
× 150 × 376 mm
Weight: 21.8 lbs., 9.9 kg
Transmitter: Infrared
Signal range: Approx. 16 ft., 5 meters
Power supply:
Two “AA” batteries (1.5 V
× 2)