Filter
Top Products
133
Controlling Other Components—Continued
PLAY MODE button
Selects play modes on components with selectable
play modes.
Works as a Resume button when used with a DS-A2
RI Dock.
RANDOM button
Used with the shuffle function.
Note:
With some components, certain buttons may not work as
expected, and some may not work at all.
By pressing the REMOTE MODE button that’s been
programmed with the remote control code for your cas-
sette recorder, you can control your cassette recorder
with the following buttons.
The [TV/TAPE] button is preprogrammed with the
remote control code for controlling an Onkyo cassette
recorder when used with an connection.
For details on entering a remote control code for a differ-
ent component, see page 125.
On twin cassette decks, only Deck B can be controlled.
ON, STANDBY buttons
Turns the cassette recorder on or off.
Previous and Next [ ]/[ ] buttons
The Previous [ ] button selects the previous
track. During playback it selects the beginning of
the current track. The Next [ ] button selects the
next track.
Depending on how they were recorded, the Previous
and Next [ ]/[ ] buttons may not work prop-
erly with some cassette tapes.
Fast Reverse and Fast Forward [ ]/[ ]
buttons
The Fast Reverse [ ] button starts fast reverse.
The Fast Forward [ ] button starts fast forward.
Reverse Play [ ] button
Starts reverse playback.
Play [ ] button
Starts playback.
MUTING button (62)
Mutes or unmutes the AV receiver.
VOL [ ]/[ ] button (60)
Adjusts the volume of the AV receiver.
Stop [ ] button
Stops playback.
Notes:
• An Onkyo cassette recorder connected via can
also be controlled in Receiver mode.
• With some components, certain buttons may not work
as expected, and some may not work at all.
Controlling a Cassette Recorder
Press the appropriate
REMOTE MODE button first
TX-NR807_En.book Page 133 Tuesday, July 28, 2009 12:00 PM