Filter
Top Products
48
CONNECTIONS
SYSTEM EXPANSION
5. System Expansion Input to System Expansion Output
Four-pair twisted cable, terminated with male RJ-45
plugs, connects multiple ZR-4630's using the System
Expansion Input and Output terminals. Connections are
made from the Input of one of the ZR-4630's to the
Output of another, and so on (for more information on
Terminating Four-Pair Twisted Cable, refer to page 44).
IR FLASHERS
6. Low-Output Flasher to the Flasher Outputs
The mini-plug end of a Niles Low Output MicroFlasher
™
,
Model IRC-2P (FG00726), connects into the Flasher
Outputs 2-4. The Micro-Flasher portion of the IRC-2P is
placed directly over the IR sensor of the corresponding
source component (Source 2 for Flasher 2, Source 3 for
Flasher, Source 4 for Flasher 4) and adheres with the
included peel-back tape.
7. High-Output Flasher to the Flasher Outputs
The mini-plug end of a Niles High Output Flasher, Model
IRC-1P (FG00932), connects to the Flasher Output
labeled ALL. The IRC-1P is strategically positioned to pro-
vide IR transmission to all source components and
adheres with its included Velcro mounting system.
HOME THEATER CONTROL SYSTEM
8. IR Output of a Home Theater Control System to the IR In
The mini-plug end of a Niles Accessory Cable (FG00724)
connects a Home Theater Control System to the IR Input.
12V CONTROL SIGNALS
9. 12V Control Output to a Voltage Triggered Device
The mini-plug end of a Niles Accessory Cable (FG00724)
connects the 12V Control Output to the Trigger Input of a
voltage-activated device (i.e., Niles AC-3).
AM/FM ANTENNAS
1. FM Dipole Antenna
The included FM Dipole Antenna connects with its bare-
wire ends to the spring-loaded terminals labeled FM and
GND. The antenna is then positioned and mounted for
proper reception.
1. AM Loop Antenna
The included AM Loop Antenna connects with its bare-
wire ends to the spring-loaded terminals labeled AM and
GND. The antenna is then positioned and mounted for
proper reception.
SOURCE-COMPONENT AUDIO SIGNALS
1. Audio Output of Source Components to the ZR-4630
Male-to-male RCA Audio Cables connect the three
external audio sources.
TELEPHONE PAGING
1. Paging Output of Telephone System to ZR-4630
Page Input
A male-to-male RCA Audio Cable connects the paging
output of a telephone system to the ZR-4630.
PREAMPLIFIER ZONE OUTPUTS
1. Zones 1-6 (4-6 set to Variable Mode)
Male to male RCA Audio Cables connect Zone Outputs
1-6 to an external amplifier for more power in a zone
(refer to System Configurations 8 & 9 for more details).
1. Zones 4-6 Set to Fixed Mode
Male to male RCA Audio Cables connect Zone Outputs
4-6 (set to fixed output mode) to an external amplifier for
more rooms in a zone (refer to Configuration 10 for more
details).
SPEAKERS
1. Zones 1-6
Niles no-strip connectors connect speaker wires from the
speakers placed in the listening zones.
AC POWER
1. Removable AC Power Cord
The removable AC power cord (included with the ZR-4630)
connects to the removable power-cord socket and to an AC
power outlet.
5
6
7
8
9
10
11
12
13
14
15
16
17